Cant't stay loged in

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Cant't stay loged in

Post by little blue choo »

Before I start looking at my computer for the problem I just wanted ask if anyone else was having a problem staying logged in. When I go back and forth on the forum using the back button I become logged out a lot! I have never had this problem before and have made no changes on my end. If no one else is having this problem I will assume the problem is with my computer. Thanks guys.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Cant't stay loged in

Post by WyoGreen »

Rick, I don't seem to be having any problem with staying logged in.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

Thanks Steve. I'm using Internet Explorer. May I ask what you're using?

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
rons
2.5 Star Member
2.5 Star Member
Posts: 179
Joined: Thu Jul 23, 2015 2:26 pm
Location: Charlotte, NC

Re: Cant't stay loged in

Post by rons »

I have the same on my couch computer no good answer.
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

Hey Rons, it must be a North Carolina thing. LOL I plan on talking to my IT man tomorrow.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Cant't stay loged in

Post by Capstone »

Then it must be East Coast thing...

I've started to get "kicked" off constantly too. I write out a long quick reply only to have it get lost because I have to re-log in. PITA!

EDIT: This is a real problem. Just happened again like three times. I refresh a page and bam, I'm logged off.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Cant't stay loged in

Post by tcaudle »

I have it often enough that before I post I copy the contents to the clipboard and if I have to log in again I paste ti back and it submits. Seems like if I waith a couple of minutes or more before finish typing to post it prompts me to log back in.
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Cant't stay loged in

Post by WyoGreen »

Hey Rick, I'm using FireFox on a Linux system, and still don't seem to be having a problem. Maybe if everyone posts what browser they are using we can narrow the problem down.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Cant't stay loged in

Post by tcaudle »

Firfox on a Linux system. Firefox on a Windows does the same.
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

I'm using Internet Explorer on a windows system. Home sick today but I'm going to contact my go to computer man tomorrow. Maybe he can help. How long has this been going on with you guys. I think I will message the Adm. and see if they have any ideas. Maybe a change has been made to the forum that we need to make a correction for.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

I just sent a message to the AMD of the forum about this problem and included a link to this topic. I have included a copy of the message below. If you are having this problem also please post about your experience on this thread so the Adm. can see all concerns.
Thanks
Rick


First of all, let me thank you for all you do to maintain this wonder site. Recently some forum members have started having a problem staying logged in. Mine usually logs off if I refresh a page or use the back button. I am attaching a link to our discussion about the problem. Any help would be Greatly appreciated.

Thanks
Rick
http://www.plasmaspider.com/viewtopic.php?f=3&t=21884
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
admin
Site Admin
Posts: 370
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: Cant't stay loged in

Post by admin »

If you are having this issue the best thing you can do is clear your browser cache to eliminate your current session ID. Next time you login you will be assigned a new one and things should be fine. Pressing Ctrl-Shift-Del will bring you to your browser data clearing options and you can choose to clear cookies and other site data. Let me know if you are having troubles still.
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Cant't stay loged in

Post by Capstone »

Tried it... Did not work.

I closed chrome... reopened and did as instructed and blew out 4 weeks of history, cookies, etc.

So I relog in and I make sure to check the "keep me logged in" box and then go to a multipage thread. The second I try to jump to the 3rd page, I'm logged out. I did it three times and each time the same result.

Something is definitely "off"
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Cant't stay loged in

Post by acourtjester »

not having any problems window explorer been on a few time today all OK
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

admin: If I do this will I loose all the passwords that I have set to automatically apply when opening websites.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
admin
Site Admin
Posts: 370
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: Cant't stay loged in

Post by admin »

little blue choo wrote:admin: If I do this will I loose all the passwords that I have set to automatically apply when opening websites.

Rick
Hey Rick, you will lose your passwords and auto fill only if you choose to delete them. I prefer the Chrome browser and these are the options I would select, notice I did not check the boxes beside Password, and Autofill form data.
chrome.PNG
I will clear all sessions on our end also which will log everyone out but hopefully Capstones issue will be resolved.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Cant't stay loged in

Post by steel 35 »

Google chrome no problems for me.
From the other side.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Sheffibilt
1 Star Member
1 Star Member
Posts: 10
Joined: Sat Nov 12, 2016 4:52 pm

Re: Cant't stay loged in

Post by Sheffibilt »

I'm having the exact same problem.
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Cant't stay loged in

Post by SeanP »

No problems on Win 7 and Google chrome here.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Cant't stay loged in

Post by Capstone »

I have a sneaking suspicion that This thread is the culprit.

Every time I go there to see the new things that people are posting I get bad links and pics that won't show up. The second I try to refresh the page, I get logged out of the forum and all those red warnings come up.

Something is wonky with the ads or the pics or something else isn't right.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Cant't stay loged in

Post by msimpson99 »

I have the same problem. I use both chrome and IE and they both have this problem. It only started doing this a couple months ago.
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Cant't stay loged in

Post by tnbndr »

omething is wonky with the ads or the pics or something else isn't right.
I use Firefox and the ads don't even show up but I don't get kicked out, very often. Once in a great while it happens.
I was suspecting my virus protection program but never pursued it.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Scott F.
1.5 Star Member
1.5 Star Member
Posts: 41
Joined: Mon Dec 30, 2013 3:02 pm

Re: Cant't stay loged in

Post by Scott F. »

I have the same problem. It takes several attempts to log in and I usually get disconnected within a minute after I finally get logged into the forum. This problem started after my renewal several months ago. To post this it took me about 15 mins.

Kind regards,
Scott
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Cant't stay loged in

Post by acourtjester »

Something to consider is your internet provider I am using Cox.net and have no problems with being kicked off when I am on this site or others.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Cant't stay loged in

Post by little blue choo »

well it only happens to me on this site. Stared a couple of months ago and it just bugs the shit out of me. Not going to fight it anymore. I will check back every so often to see if it gets resolved. Till then have fun my friends.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Post Reply

Return to “CNC Plasma Cutters General Forum”