Horse Stall Sign - Oval Design

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Horse Stall Sign - Oval Design

Post by beck77 »

this is a x-mas gift i cant get it to work i yousing q-cad to draw it and star cam to make the dxf.cnc file to the plasma cutter it loks like crap i cant get the lines to close please help me

Image
oval.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: can someone please help me

Post by sphurley »

Oval2.dxf
I only found four open lines. What size did you want it to be?

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Re: can someone please help me

Post by beck77 »

Thanks but this is the problem


Image
beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Re: can someone please help me

Post by beck77 »

here is the cuttline
sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: can someone please help me

Post by sphurley »

Strange. It opens fine in Inkscape, Corel, Aspire. Can you do a SVG file?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: can someone please help me

Post by Larry83301 »

Try this. I found 6 pieces that were leftover when things were joined, some to small to zoom in on. Should work now.
OVAL2-A.rar
Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Re: can someone please help me

Post by beck77 »

thanks so mutch for helping me i will try it tomorrow
beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Re: can someone please help me

Post by beck77 »

hello again it was better but not good if you can maby you could email me the g-code and a see if its better if you want of course my email is beck_blazer@yahoo.se that would be real nice of you. i thank you for all the help sofar best regards daniel backstrom sweden
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: can someone please help me

Post by Capstone »

beck77 wrote:
IMG_0147.JPG

Wow!! That's a mess.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
Shane Warnick
3.5 Star Member
3.5 Star Member
Posts: 563
Joined: Fri Jan 24, 2014 11:03 pm

Re: can someone please help me

Post by Shane Warnick »

Try this file. I joined all the lines and made it all closed paths and reduced the nodes. If this one doesn't work you must have a setting wrong in the software you are using to generate your machine code. You will need to scale it, since it was huge when I opened it and it's still pretty large.

Shane
Stall fixed.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

beck77
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Wed May 04, 2016 3:57 am

Re: can someone please help me

Post by beck77 »

THANK YOU VERY MUCH . It went from 8,000 to 1,500 LINES AND NOW WORKS. I WISH YOU A MERRY CHRISTMAS AND THANKS AGAIN FOR ALL HELP
BEST REGARDS DANIEL BACKSTROM
Bill Reibelt
1 Star Member
1 Star Member
Posts: 21
Joined: Wed Jun 24, 2015 9:23 pm

Re: can someone please help me

Post by Bill Reibelt »

Hi Shane; I have had the same problem when converting to Vectric, Found that some of the letters in the design did not completely join. Looked a mess.
Great to see help given to others.Thank you. Bill
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Horse Stall Sign - Oval Design

Post by plasmanewbie »

Nice design, thank you!
JUSTWHATEVER
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Dec 19, 2016 5:20 pm

Re: Horse Stall Sign - Oval Design

Post by JUSTWHATEVER »

Beautiful!
Rtodahl01
2 Star Member
2 Star Member
Posts: 71
Joined: Mon Oct 02, 2017 3:39 pm

Re: Horse Stall Sign - Oval Design

Post by Rtodahl01 »

thanks, just got my table absolute newbie here
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Horse Stall Sign - Oval Design

Post by Largemouthlou »

Nice clean up Shane11
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”