TATTERED AMERICAN FLAG

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Wade Vance
1 Star Member
1 Star Member
Posts: 11
Joined: Wed Jan 15, 2014 2:45 pm

TATTERED AMERICAN FLAG

Post by Wade Vance »

Does anyone happen to have the tattered American flag file in DXF format they wouldn't mind sharing ? Got a hometown hero I want to make one of these for please.

Thank You
claddagh
1 Star Member
1 Star Member
Posts: 20
Joined: Tue Jun 30, 2015 11:56 am

Re: TATTERED AMERICAN FLAG

Post by claddagh »

TATTERED AMERICAN FLAG

Image
AmericanFlagTattered (1).dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

skyecyn
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Sat Jul 12, 2014 5:29 am

Re: TATTERED AMERICAN FLAG

Post by skyecyn »

Thanks for the file!
Redneck
3 Star Member
3 Star Member
Posts: 273
Joined: Sat Oct 06, 2012 7:16 pm

Re: TATTERED AMERICAN FLAG

Post by Redneck »

Thank you for the file.
Joey
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 61
Joined: Tue May 04, 2010 12:47 am

Re: TATTERED AMERICAN FLAG

Post by Joey »

Thanks for the file.
Thefarmersdaughter
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Tue Jul 07, 2015 10:09 pm

Re: TATTERED AMERICAN FLAG

Post by Thefarmersdaughter »

LOVE IT!!!!! Thank you!!
Proballz03
3 Star Member
3 Star Member
Posts: 285
Joined: Sun Dec 08, 2013 9:05 pm

Re: TATTERED AMERICAN FLAG

Post by Proballz03 »

anyone have a tattered rebel flag?
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
User avatar
d2day
2.5 Star Member
2.5 Star Member
Posts: 114
Joined: Wed Sep 17, 2014 7:59 pm

Re: TATTERED AMERICAN FLAG

Post by d2day »

Thank you for the file.. I have a veteran in mind for this also. I appreciate your time and efforts in making and sharing the file. :D
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
bdeihl570
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 39
Joined: Wed Jul 08, 2015 9:42 am

Re: TATTERED AMERICAN FLAG

Post by bdeihl570 »

Thank you for the file! Good work!
ranger#1
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 03, 2015 2:24 am

Re: TATTERED AMERICAN FLAG

Post by ranger#1 »

hey thanks man, any way i could get this in an svg?
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: TATTERED AMERICAN FLAG

Post by acourtjester »

Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Old Ironworker
2.5 Star Member
2.5 Star Member
Posts: 135
Joined: Tue Mar 05, 2013 1:33 pm
Location: South Haven, Mich.

Re: TATTERED AMERICAN FLAG

Post by Old Ironworker »

Thanks, claddagh.
I cut two right after your post. One went to a Army reunion as a door prize ( have not heard back yet). The other one went to the Blueberry Festival, and I had people almost fighting over it ( Ha! ). I wish that I cut a half dozen for the weekend . I did get a order for 3 and maybe a order to go to Texas. I did mod to the Stars ( not drop out ) and hung a Heart and Mich. to the bottom, torch heat the blue area and Bill's red dye.
Thanks Again,
Dale..........
GEDC0140 (640x480).jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

ranger#1
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 03, 2015 2:24 am

Re: TATTERED AMERICAN FLAG

Post by ranger#1 »

acourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
I tried opening it up in inkscape and it didnt work corectly :cry:
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: TATTERED AMERICAN FLAG

Post by Larry83301 »

ranger#1 wrote:
acourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
I tried opening it up in inkscape and it didnt work corectly :cry:

See if this will open for you.
AMERICANFLAGTATTERED (1).DXF

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

ranger#1
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 03, 2015 2:24 am

Re: TATTERED AMERICAN FLAG

Post by ranger#1 »

so,i got it to open in solid edge, re saved it as a .dxf then it would open in inkscape, then it would open in sheet cam, weird.
ranger#1
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 03, 2015 2:24 am

Re: TATTERED AMERICAN FLAG

Post by ranger#1 »

i wana do a big one like 5x10.
rbarabe
1 Star Member
1 Star Member
Posts: 20
Joined: Thu Sep 29, 2016 11:16 pm

Re: TATTERED AMERICAN FLAG

Post by rbarabe »

Thank you I have been looking for this file or trying to recreate! I love this forum! I will be posting some of my designs!
User avatar
csplazma1
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Thu Nov 19, 2015 12:00 pm
Location: Bismarck ND
Contact:

Re: TATTERED AMERICAN FLAG

Post by csplazma1 »

I was able to cut of course you will need to clean it up or it will not cut properly. I just cut an 18x32 and it turned out pretty good. will adjust measurements as to not waste too much metal. We have never used patina colors and will be giving that a shot. For the new folks always check and double check your cut paths!! Tried Steel FX for the first time and highly recommend an air brush with the metal dyes. Used a cotton ball on this one and is ok. Here are the files.
Flag.jpg
TATTERED FLAG.jpg
Flag.dxf
Flag.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by csplazma1 on Tue Nov 08, 2016 8:37 pm, edited 2 times in total.
C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
JayG
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Wed Aug 17, 2016 3:39 pm

Re: TATTERED AMERICAN FLAG

Post by JayG »

Thank you for sharing. Very nice! JayG
PlasmaCam DHC2
Hypertherm Powermax 85
Miller EconoTig
Miller MIG
Lincoln MIG
Millwright Knee mill (older than me!)
LeBond Lathe (older than me!)
twistediron
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Oct 25, 2016 8:07 pm

Post by twistediron »

Great file!!
FastByFelix
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat Sep 29, 2012 10:29 am
Location: Moncks Corner,SC

Re: TATTERED AMERICAN FLAG

Post by FastByFelix »

Incredible talent..... Thank You!!
User avatar
Serenityfab
1 Star Member
1 Star Member
Posts: 14
Joined: Tue Dec 02, 2014 4:43 pm
Location: Bozeman Montana
Contact:

Re: TATTERED AMERICAN FLAG

Post by Serenityfab »

Wow! There are some amazing artists on the Forum.
Thank you to everyone who help others to do better...
Serenity Metalworks
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
jwallmuth
1 Star Member
1 Star Member
Posts: 19
Joined: Thu Aug 18, 2016 7:55 am

Re: TATTERED AMERICAN FLAG

Post by jwallmuth »

Larry83301 wrote:
ranger#1 wrote:
acourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
I tried opening it up in inkscape and it didnt work corectly :cry:

See if this will open for you.
AMERICANFLAGTATTERED (1).DXF

Larry
i can open this in bobcad, but it won't open in sheetcam it just keeps saying a problem has caused the program to stop working correctly, any suggestions
jwallmuth
1 Star Member
1 Star Member
Posts: 19
Joined: Thu Aug 18, 2016 7:55 am

Re: TATTERED AMERICAN FLAG

Post by jwallmuth »

csplazma1 wrote:I was able to cut of course you will need to clean it up or it will not cut properly. I just cut an 18x32 and it turned out pretty good. will adjust measurements as to not waste too much metal. We have never used patina colors and will be giving that a shot. For the new folks always check and double check your cut paths!!
Flag.jpg
Tried Steel FX for the first time and highly recommend an air brush with the metal dyes. Used a cotton ball on this one and is ok.

how did you like steel FX stuff?
User avatar
csplazma1
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Thu Nov 19, 2015 12:00 pm
Location: Bismarck ND
Contact:

Re: TATTERED AMERICAN FLAG

Post by csplazma1 »

Took a little to get used to and when they say airbrush is the best application they mean it. Only one issue I had was that my blue for what ever reason keeps coming out more aqua colored than blue. I am not getting the brilliant cobalt blue that I thought I would or as pictured in most of the pictures others post.
C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”