Jeep Grill Firepit DXF Design
-
- 3 Star Elite Contributing Member
- Posts: 288
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: Jeep Grill Firepit
Nice thanks for the file.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 2 Star Elite Contributing Member
- Posts: 62
- Joined: Sat Sep 13, 2014 1:32 pm
- Location: Eastern Washington
Re: Jeep Grill Firepit
Thanks for the file
-
- 2.5 Star Member
- Posts: 120
- Joined: Wed Nov 26, 2014 9:13 am
- Location: Portage, WI
Re: Jeep Grill Firepit
I imported the .DXF into CorelDRAW, spent entirely too much time labeling all of the curves and organized it into outside/inside cuts in two separate layers.
This should make it easier for the SheetCam crowd. I tried to attach the relabeled .DXF as exported from CorelDRAW, but it was 5.5MB and too big for the forum.
Go easy on me, I'm learning.
Cheers,
Matt
This should make it easier for the SheetCam crowd. I tried to attach the relabeled .DXF as exported from CorelDRAW, but it was 5.5MB and too big for the forum.
Go easy on me, I'm learning.
![Wink ;)](./images/smilies/icon_e_wink.gif)
Cheers,
Matt
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Custom LDR Motion Systems 5x10 table w/ rotary axis and scribe
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Jeep Grill Firepit
![Confused :?](./images/smilies/icon_e_confused.gif)
![Confused :?](./images/smilies/icon_e_confused.gif)
There is no need for separate layers for sheet cam and if you've made the file so big you've done a lot wrong.
Murray
-
- 2.5 Star Member
- Posts: 120
- Joined: Wed Nov 26, 2014 9:13 am
- Location: Portage, WI
Re: Jeep Grill Firepit
I've been under the impression that you need to differentiate between inside contours from outside contours in SheetCam by selecting the proper layers:
Cheers,
Matt
As for the .DXF file size - I don't have a good explanation for that yet. ![Laughing :lol:](./images/smilies/icon_lol.gif)
Cheers,
Matt
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Custom LDR Motion Systems 5x10 table w/ rotary axis and scribe
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Jeep Grill Firepit
Typically if you have a closed object ie: something with a perimeter you select "outside offset" and Sheetcam will automatically offset inside cuts to the inside and outside cuts to the outside. If you are cutting something into an existing piece ie: a tree of life into a saw blade then you select "inside offset" and Sheetcam will automatically do the offsets correctly. On open paths ie: single cut lines you can choose to have no offset or inside/ outside offset. It will also automatically set the cut direction to what you have it set to (normally reverse direction) to keep the waste on the correct side of the cut.
Another setting you can change is whether to do all inside cuts first, then all outsides or complete each object first which is what I normally use, ie: on the jeep firepit one you would cut each piece before moving onto the next.
Murray
Another setting you can change is whether to do all inside cuts first, then all outsides or complete each object first which is what I normally use, ie: on the jeep firepit one you would cut each piece before moving onto the next.
Murray
-
- 2.5 Star Member
- Posts: 120
- Joined: Wed Nov 26, 2014 9:13 am
- Location: Portage, WI
Re: Jeep Grill Firepit
Wow - OK...very good info there - thanks! I guess I shouldn't have taken the demo videos I've been watching too seriously.
While my table is being built, I've been trying to learn the software workflow the best that I can.
Cheers,
Matt
While my table is being built, I've been trying to learn the software workflow the best that I can.
Cheers,
Matt
Custom LDR Motion Systems 5x10 table w/ rotary axis and scribe
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
Hypertherm Powermax85
Quincy 325 compressor
Ingersoll Rand D18IN refrigerated air dryer
Millermatic 251 MIG
Everlast PowerPro 256 TIG/stick/plasma w/ water cooler
-
- 1/2 Star Member
- Posts: 2
- Joined: Thu Jul 23, 2015 9:39 pm
Re: Jeep Grill Firepit
that lokks amazing Wow! nice work
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Jeep Grill Firepit
Sorry, I forgot to add that when you select inside or outside offset it also automatically puts the lead ins and lead outs if used to the correct side and set the cut path order to your preferences, if you wish to change the location or sequence you can.
- 1fine79
- 2 Star Member
- Posts: 56
- Joined: Fri Dec 27, 2013 8:31 pm
- Location: Ranger, GA
- Contact:
Re: Jeep Grill Firepit
Very creative, Dude. I love the fact that it is a knock down unit....that makes it very easy to pack up and take on a camping trip. Although, 3/16" material is still heavy to handle. Thanks for sharing.
Wayne
Torchmate 2 self-built 5x10 w/ SS water table AVHC New
Hypertherm PM65 New
Miller Spectrum 2050 hand torch
Miller Syncrowave 250 DX
Millermatic 212 w/ spoolgun
Lincoln SP-250
JD squared Model 32 hyd.bender
Torchmate 2 self-built 5x10 w/ SS water table AVHC New
Hypertherm PM65 New
Miller Spectrum 2050 hand torch
Miller Syncrowave 250 DX
Millermatic 212 w/ spoolgun
Lincoln SP-250
JD squared Model 32 hyd.bender
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Re: Jeep Grill Firepit
Thanks for sharing..that is an great piece of work.. ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
-
- 1.5 Star Member
- Posts: 30
- Joined: Fri Jun 26, 2015 6:31 pm
Re: Jeep Grill Firepit
thanks for file made one it's sweet
thermal dyn 152
4 x 8 eagle plasma table
400 amp portable welder
250 amp Lincoln stick
miller cp300 w/ S-52d
miller cp300 w/S54a setup for alum
13 x 60 south bend lathe
emco mill
Amer bender
http://www.facebook.com/gene'sweldingandfabrication![Smile :)](./images/smilies/icon_e_smile.gif)
4 x 8 eagle plasma table
400 amp portable welder
250 amp Lincoln stick
miller cp300 w/ S-52d
miller cp300 w/S54a setup for alum
13 x 60 south bend lathe
emco mill
Amer bender
http://www.facebook.com/gene'sweldingandfabrication
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu Aug 20, 2015 8:13 pm
Re: Jeep Grill Firepit
Hi, Love the Jeep fire pit. but I had to cut the tabs off because the slots were to small for the tabs. I welded it through the slot holes and then used a 80 grit sanding disc to finish it off. What do you think? I'm going to paint it with high heat paint tomorrow.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 179
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Jeep Grill Firepit
I had to go back to page 8 to find this. I guess that is what search is for. another version of this that I made. I had a pallet of old tire chains that I used on the "tailgate" and modified the grill.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 410
- Joined: Tue Jan 05, 2010 7:00 am
Re: Jeep Grill Firepit
Fantastic idea
-
- 1 Star Member
- Posts: 16
- Joined: Tue Aug 04, 2015 10:55 am
Re: Jeep Grill Firepit
Here is the one i made with a few slight changes.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 133
- Joined: Tue Dec 08, 2015 1:06 am
- Location: St. George, Utah
Re: Jeep Grill Firepit
Question - how much do you guys charge for that Jeep grill?
5x10 ArcLight Dynamics Plasma table
http://www.thesteelyardinc.net
http://www.thesteelyardinc.net
-
- 1/2 Star Member
- Posts: 3
- Joined: Sun Aug 16, 2015 10:35 pm
Re: Jeep Grill Firepit
$150-500 depending on size and thickness
-
- 1/2 Star Member
- Posts: 3
- Joined: Fri Jun 26, 2015 3:02 am
Re: Jeep Grill Firepit
I had started something like this, great work. Thanks
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 811
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Jeep Grill Firepit
Awesome! Thanks for sharing!
I think I'm the oldest 10 year old boy on the forum...
-
- 1 Star Member
- Posts: 10
- Joined: Mon Mar 07, 2016 3:09 pm
Re: Jeep Grill Firepit
Thanks for the download.
-
- 1 Star Member
- Posts: 11
- Joined: Sun Apr 17, 2016 9:12 pm
Re: Jeep Grill Firepit
I'm new here on PlasmaSpider. Just wanted to say I love this Firepit! Great Job!
-
- 1 Star Member
- Posts: 14
- Joined: Thu Apr 14, 2016 11:31 pm
Re: Jeep Grill Firepit
Thanks for posting, great project.
-
- 1/2 Star Member
- Posts: 5
- Joined: Sun Apr 24, 2016 10:47 am
- Location: Kentville, NS Can
Re: Jeep Grill Firepit
First time sharer here. I wish I would have found this site before I put many hours in on my own Jeep Fire Pit. Here are a few different ones.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Jeep Grill Firepit
I cut one per original file size (approx 22" x 24"), out of 3/8. Using the sheetcam plasma calculator from another member, my "standard" price for this would be $150. That's straight off the table, only knocked off dross. Looking at some of the examples listed online, that seems to be quite inexpensive! The same unit, sold here:zj95 wrote:$150-500 depending on size and thickness
http://www.thefirepitfactory.com/#!firepits/cjg9
Theirs is $418cdn as equipped like mine (floor, grill, feet), which is still $330 usd What am I missing here? Their flat rate shipping is an additional $109cdn.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam