Corner squiggles on my dynatorch xls

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
Dynatorch78
1 Star Member
1 Star Member
Posts: 21
Joined: Thu Jan 07, 2016 5:23 pm

Corner squiggles on my dynatorch xls

Post by Dynatorch78 »

Whenever my machine takes a corner at 120IPM or above, I get a squiggly line for about 2 " then it becomes straight again. I turned the corner intensity all the way down and slowed the speed down as much as possible also. I don't want to be smoothing out these squiggles forever. Does anyone have any Advice? BY the way, it is a new Dynatorch xls .
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Corner squiggles on my dynatorch xls

Post by Gamelord »

This is a common issue, something is loose, either your gantry has some play, your torch has some play or your slats are shaking in the table.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
TMC
2 Star Member
2 Star Member
Posts: 53
Joined: Fri Apr 11, 2014 11:54 am

Re: Corner squiggles on my dynatorch xls

Post by TMC »

Dynatorch78, I have been down this road myself with my Dynatorch. Don't assume anything is wrong with your gantry. I would suggest calling Michael Garrett, he helped me out a bunch. I have a SuperB so I can't help with your table much. Good luck!
Talbot Metal Crafting
DynaTorch 4x4 SuperB
Hypertherm PMX 85
Corel 7X
Solid Edge
SheetCam

Easton, Maryland
Post Reply

Return to “Various Manufacturers Forum”