Any one using the air scribe from dynatorch?
Could you post up some pics of work you've done?
I'm in the market for a new table and I've narrowed it to two.
Already familiar with the dynatorch but also looking at the ldr.
Looking at a 5x10 or a 6x12 with scribe and possibly a pipe cutter.
Thanks
Chris
Scribe?
- cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Scribe?
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
- 2 Star Member
- Posts: 53
- Joined: Fri Apr 11, 2014 11:54 am
Re: Scribe?
I was initially going to buy the scribe from them when I ordered my table however Rick talked me out of it. Said it wasn't really designed to do art work. Regretting not getting it now. Check out what Going Custom is doing with his scribe (not a Dynatorch though). He is doing exactly what I was wanting to do. He said so far he has good success with his setup.
Talbot Metal Crafting
DynaTorch 4x4 SuperB
Hypertherm PMX 85
Corel 7X
Solid Edge
SheetCam
Easton, Maryland
DynaTorch 4x4 SuperB
Hypertherm PMX 85
Corel 7X
Solid Edge
SheetCam
Easton, Maryland
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Scribe?
there is a new sub-forum in plasmaspider that might give you some ideas
buying one off air slides and cheap air control valves on ebay gets the cost way under what you can buy a kit from the vendors
not knocking any vendor, they have to buy new air slides at new air slide cost
we get to buy new air slides for one off builds
http://www.plasmaspider.com/viewforum.php?f=100
buying one off air slides and cheap air control valves on ebay gets the cost way under what you can buy a kit from the vendors
not knocking any vendor, they have to buy new air slides at new air slide cost
we get to buy new air slides for one off builds
http://www.plasmaspider.com/viewforum.php?f=100
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
-
- 2.5 Star Member
- Posts: 205
- Joined: Sun Apr 20, 2014 9:38 am
Re: Scribe?
I want one but can't afford it right now. I'm keeping my eye on the scribe section for when someone makes a dynatorch one.
Dynatorch 4x4 SuperBee, Powermax 65, Quincy QT-54, Snap On MM250SL, Thermal Arc Arcmaster 185, Corel Draw X7 and a messy garage.