DYNATORCH OWNERS . . .

Don't see your table manufacturer listed above? Post here in this forum.
Dynatorch78
1 Star Member
1 Star Member
Posts: 21
Joined: Thu Jan 07, 2016 5:23 pm

Re: DYNATORCH OWNERS . . .

Post by Dynatorch78 »

Located in Bangor Pennsylvania.
Iron Addictions
1 Star Member
1 Star Member
Posts: 12
Joined: Fri Oct 14, 2016 3:01 pm

Re: DYNATORCH OWNERS . . .

Post by Iron Addictions »

Dynatorch Super B 4x8
Water Table
Air Scribe
Arbor Cutting Shop
Sheet Cam

Just cut my first piece this week! It has been in the garage for several months waiting to get power run to everything and materials. Very excited!
Countrylane
2.5 Star Member
2.5 Star Member
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: DYNATORCH OWNERS . . .

Post by Countrylane »

Dynatorch 5 X 10 table with plasma and oxy acetylene
Downdraft
Tube cutting attachment
We - cim and cutting shop program
Lot of drawings made with deltacad
Purchased in 2007

I'm in Alberta Canada
gsi
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Jul 18, 2015 2:56 pm
Location: Huntsville, AL
Contact:

Re: DYNATORCH OWNERS . . .

Post by gsi »

4x8 super b with A80 and scribe. We're in North Alabama about 20 minutes from Dynatorch.
miles peters
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Nov 06, 2016 12:17 pm

Re: DYNATORCH OWNERS . . .

Post by miles peters »

Dynatorch 4x8 tube cutting scibe
we-cim cutting shop
best tool I ever bought only problem is I can't live without it anymore.

Vancouer bc
0326 FABRICATION
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon Dec 12, 2016 12:19 am

Re: DYNATORCH OWNERS . . .

Post by 0326 FABRICATION »

In 2012 I bought a 4x4 Super Bee Table with a Hypertherm 65 plasma. I only bought the 4x4 table because I was working out of my two car garage at the time and space was at a premium. After a move to a much larger shop space and the table making more than enough to pay for itself I sold the Super Bee and bought a larger XLS table. I've got a 5x10 XLS downdraft table with the DynaScribe attachment now. I upgraded to a Hypertherm 85 plasma at the same time.

Both tables have been fantastic as has Dynatorch. I even went all the way to Alabama to pick up the new table. It was great to finally meet the people that I've been talking to on the phone.

I'm North of Escondido, California.
olsonironworks
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri Feb 13, 2015 1:50 pm

Re: DYNATORCH OWNERS . . .

Post by olsonironworks »

I have a 5x10 XLS downdraft with THC. I run a hypertherm 85. I use sigma nest for my nesting and Arbor image for my drawing. I make everything from simple sings and décor to farm repair and equipment. I am in Iowa. My facebook page is https://www.facebook.com/Olsonironworks/ Thank You,
Shane O
calsdad
1.5 Star Member
1.5 Star Member
Posts: 30
Joined: Tue May 06, 2014 11:51 pm

Re: DYNATORCH OWNERS . . .

Post by calsdad »

Not a Dynatorch table owner - yet. But I'm seriously investigating getting a 4x4 table - if I go with Dynatorch it will be a SuperB 4x4.

Wondering if some of the Dynatorch owners here can tell me what made them choose Dynatorch over some of the competition. When I first seriously started thinking of this a couple of years back - I pretty much settled on choosing between PlasmaCam and Dynatorch, and in that comparison the Dynatorch seemed like the better machine.

I actually have the money now to purchase a table - and so I'm revisiting the selection process. I hadn't heard of them last year when was last spending any time looking, but now I see that Arclight tables seem to be pretty popular. Then have some cool features like a trace option and pipe cutter on their tables that are around the same price range as the SuperB 4x4.

I think the SuperB is a smaller table though - which is something that is important to me. The Arclight 4x4 table is almost 6ft square. Is the Dynatorch 4x4 table that large? I'm somewhat space restricted so a more compact table is a definite purchasing point for me.

THanks!
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: DYNATORCH OWNERS . . .

Post by cstroke »

Customer service and a great product.
This is my second table from them.
I had some troubles with my table, lightning strike took out a bunch of stuff. When in the trouble shooting phase Leon called me on a Sunday to try and help me out.
Chris
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
Jwagnon89
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Fri Oct 13, 2017 4:03 pm
Location: Athens Alabama

Re: DYNATORCH OWNERS . . .

Post by Jwagnon89 »

Wow, can't believe all of the owners near Dynatorch. I'm awaiting the call to pick up my 5x10 Super B with stainless water table and Thermal Dynamics A80! I'm in Athens Alabama.
Dynatorch 5x10 Super B with water table
Thermal Dynamics A80
Miller 250x
Protools 105 tubing bender
JD2 beast notcher
Billy wesson
1 Star Member
1 Star Member
Posts: 10
Joined: Thu Nov 23, 2017 11:09 am

Re: DYNATORCH OWNERS . . .

Post by Billy wesson »

I have the xls 4 x 8 with a hyperthermia 85 after a run of bad luck with the honey do list (broken heel) l am now back at trying to learn this system. Location central Alabama
calsdad
1.5 Star Member
1.5 Star Member
Posts: 30
Joined: Tue May 06, 2014 11:51 pm

Re: DYNATORCH OWNERS . . .

Post by calsdad »

Got my used 4x4 XLR8 table back last week and starting to get it setup. Located up in MA, it will have a Hypertherm Powermax 65 hooked up to it once I get it running.
War Hammer
1 Star Member
1 Star Member
Posts: 18
Joined: Sun Sep 24, 2017 8:52 pm

Re: DYNATORCH OWNERS . . .

Post by War Hammer »

Old 5'10' table with the Red torque rod under the gantry.
Thermal Dynamic Cutmaster 152 (the only downside to the table)
Location: Utah
KOI
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Thu Jun 21, 2018 11:59 am

Re: DYNATORCH OWNERS . . .

Post by KOI »

Hey guys ,New to the game but looking into buying 6x12 XLE series.If anyone can give me some feedback I would greatly appreciate it.Thanx
Sidro
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Mar 05, 2019 10:08 pm

Re: DYNATORCH OWNERS . . .

Post by Sidro »

Going to pick up a 4x8 Super B with water table, Hypertherm PM 85,dyna scribe,and laser guide in a couple weeks, it was ready this week I just cant get off work for a couple of weeks. First time cnc plasma user. I live in south central Mo. Thomasville.
Metalmorphosis
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Apr 11, 2019 11:23 pm

Re: DYNATORCH OWNERS . . .

Post by Metalmorphosis »

Hey, y'all. I picked up a lightly used SuperB 4x8 last year. Owned by a little old lady, only driven to the hair salon and Church! ;) I was just about to pull the trigger on a 5x10 Dyna with downdraft and a PM85 when this 4x8 popped up with the same options, but about 10k cheaper! So I sacrificed some real estate to save some money. Been happy so far. I've put a lot more wear on the slats than the previous owner did! I'm still learning how to optimize it. Winston-Salem, NC here.
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: DYNATORCH OWNERS . . .

Post by cstroke »

Late to the party but congrats!!!
Great company
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: DYNATORCH OWNERS . . .

Post by cstroke »

KOI wrote: Mon Jan 14, 2019 12:22 pm Hey guys ,New to the game but looking into buying 6x12 XLE series.If anyone can give me some feedback I would greatly appreciate it.Thanx
Sorry I missed this.
I have a 6'x12' table with a down draft.
tube cutter and scribe.
Machine is great. I could nit pic some stuff but it's pretty good. Cuts great.
If you have any questions post it up and Ill see if I can answer. If I dont answer hit me with a DM so I see it.
Good luck and enjoy process.
Chris
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
ROKCRLER
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 583
Joined: Sun Sep 30, 2018 5:19 pm

Re: DYNATORCH OWNERS . . .

Post by ROKCRLER »

4x8 SuperB
PM85
North Alabama

CNC Shop and Service have been awesome to deal with!
4x8 Dynatorch
PM85
~Mo~
Doc
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Wed Jul 02, 2014 4:16 pm

Re: DYNATORCH OWNERS . . .

Post by Doc »

Really??
Office phone has the “voicemail box is full” recording and no callback from Russell from cell#.
My Super B is great when it works, which is intermittent now: starts up and then loses arc.
Emailed them today. We’ll see...
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: DYNATORCH OWNERS . . .

Post by cstroke »

That's odd, the tech service there is top notch..
Hope this is just a gremlin for you.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
ROKCRLER
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 583
Joined: Sun Sep 30, 2018 5:19 pm

Re: DYNATORCH OWNERS . . .

Post by ROKCRLER »

I talked with Russell last week, mentioned the phone issue. Try sending him an email..russell@cncshopandservice.com he's been quick to reply.

Hes on here now also... @CNCSASRUSS
4x8 Dynatorch
PM85
~Mo~
Post Reply

Return to “Various Manufacturers Forum”