DYNATORCH OWNERS . . .

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

DYNATORCH OWNERS . . .

Post by CNCCAJUN »

As some of you know a few of us Dynatorch owners have requested a "DYNATORCH SECTION"

Would appreciate it very much if you are a member & a Dynatorch Owner, please make yourself known.

Say "PRESENT" . . . :D or hey, I own a Dynatorch . . . Maybe table size & model . . . even what state you are located it would be nice.

I know Dynatorch has great customer service, but it would be nice to have a place to post simple questions as how to do something like the PlasmaCAM people have on this site.

Unlike PlasmaCAM owners, we don't have a company sponsored site that is separate from plasmaspider to discuss our equipment.

Steve in Louisiana . . .
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

soon to have one
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
btburn
2.5 Star Member
2.5 Star Member
Posts: 205
Joined: Sun Apr 20, 2014 9:38 am

Re: DYNATORCH OWNERS . . .

Post by btburn »

I've got mine up and running now.
4x4 Super B with a Miller spectrum 875.
Located in Colorado.
Dynatorch 4x4 SuperBee, Powermax 65, Quincy QT-54, Snap On MM250SL, Thermal Arc Arcmaster 185, Corel Draw X7 and a messy garage.
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

btburn wrote:I've got mine up and running now.
4x4 Super B with a Miller spectrum 875.
Located in Colorado.

CONGRATULATIONS ! ! ! !
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

Sweet. I hope to have mine paid in full this week.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

wilber wrote:Sweet. I hope to have mine paid in full this week.
Where are you located Wilber?

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: DYNATORCH OWNERS . . .

Post by cstroke »

2007 5'x10'
we-cim for my nesting.
located in central pennsylvania.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

Small town called Lewisburg, Ky
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

Well I got a call from Ric today. It was shipped today and will deliver tomorrow. Bad news is i work 75 miles away and will not be able to see my new baby till friday night.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
dlbrack
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Wed Apr 23, 2014 11:27 pm
Location: Bridge City TX.

Re: DYNATORCH OWNERS . . .

Post by dlbrack »

I've had my Super B 4'x8' for a couple months now, I still need to get Cad or a program to make my own parts.
I am new to cnc cutting so I have a lot of learning to do but I'm really pleased with the machine.

I'm all for a Dynatorch section

Bridge City, Tx.
Dynatorch Super B 4'x8'
Hypertherm 65
SheetCam
darinm
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Jun 12, 2012 8:36 pm

Re: DYNATORCH OWNERS . . .

Post by darinm »

Have a dynatorch 5 x 10 table with Hypertherm 1250 had it a couple of years. Located in texas
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

What kind stuff do you make on it?

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Blacky2112
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Wed Sep 10, 2014 1:20 pm

Re: DYNATORCH OWNERS . . .

Post by Blacky2112 »

I just purchased a Dynatorch 4X8 with a Powermax 85.
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

Congratulations ! ! !

What state are you in?

What you going to cut with it . . .

You will like it . . .

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

yeap you will like it. Mine is working great.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
Kennemer
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Tue Oct 07, 2014 3:11 pm
Location: Huntsville, Alabama

Re: DYNATORCH OWNERS . . .

Post by Kennemer »

New Super B 4x8 owner in north Alabama. Awaiting my 200amp service install.
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

Kennemer wrote:New Super B 4x8 owner in north Alabama. Awaiting my 200amp service install.

CONGRATULATIONS ! ! ! !

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: DYNATORCH OWNERS . . .

Post by wilber »

Congrats.

if you have any question we will try and answer. you will like the people from dynatorch they are very friendly and helpful
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
Kennemer
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Tue Oct 07, 2014 3:11 pm
Location: Huntsville, Alabama

Re: DYNATORCH OWNERS . . .

Post by Kennemer »

Thanks I appreciate the support. I hope to add to discussions and help soon just have to do some learning first. Cutting shop is a learning curve
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

Congratulations . . .

What area of the country are you in?

Which Dynatorch did you go with?

I'm still learning . . .an learning . . .

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Kennemer
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Tue Oct 07, 2014 3:11 pm
Location: Huntsville, Alabama

Re: DYNATORCH OWNERS . . .

Post by Kennemer »

CNCCAJUN wrote:Congratulations . . .

What area of the country are you in?

Which Dynatorch did you go with?

I'm still learning . . .an learning . . .

Steve
Thanks! I am in North Alabama, about 40 min from Dynatorch. I have the Super B 4 x 8 with the Themal Dynamics A60 cutter. What software are you all using? I have Cutting Shop and SheetCam.
FastLane MetalWorx
DynaTorch 4'x8'
TD A60
8ft Hydrographics tank
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: DYNATORCH OWNERS . . .

Post by CNCCAJUN »

Trying to learn to create in CorelDraw 7 & InkScape . . .

Use AutoCAD 14 with no problems . . .

Using SigmaNest :( & SheetCAM . . .

How do you like Cutting Shop?

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Kennemer
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Tue Oct 07, 2014 3:11 pm
Location: Huntsville, Alabama

Re: DYNATORCH OWNERS . . .

Post by Kennemer »

I have no CAD or drawing experience and even less time to learn so it makes it very difficult. I am thinking about trying CorelDraw.

I bought my table as a hobby so i have no rush. I sold a hotrod that I had and turned around and bought the table because they are awesome :D
FastLane MetalWorx
DynaTorch 4'x8'
TD A60
8ft Hydrographics tank
User avatar
admin
Site Admin
Posts: 373
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: DYNATORCH OWNERS . . .

Post by admin »

We have added a new forum specifically for the Dynatorch owners. This is something CNCCAJUN has requested in the past and it appears as though there is enough interest. You can find it in the same sub-forum the other manufacturers are in. Any problems or questions just let me know.
Dynatorch78
1 Star Member
1 Star Member
Posts: 21
Joined: Thu Jan 07, 2016 5:23 pm

Re: DYNATORCH OWNERS . . .

Post by Dynatorch78 »

Dynatorch xls 5'×10'
Water table
Air scribe
Extended gantry
Sigma nest
Hypertherm powermax 125
Post Reply

Return to “Various Manufacturers Forum”