Phoenix

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Twisted 1
2 Star Member
2 Star Member
Posts: 50
Joined: Thu Jan 28, 2010 9:47 am
Location: Ontario Canada

Phoenix

Post by Twisted 1 »

Hi all, I am still new to tracing and have tried this a couple of times with no luck. Would someone be able to help with this please. when I try the flats of the lines are rounded at the corners. I have tried with Corel and Inkscape. Not too sure what I am doing wrong. I usually don't do too much art stuff, but a friend has asked me for this. I am willing to pay for this. Thanks in advance

Image
Pete
Twisted Image Customs and Fabrication
Ontario Canada
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Help Needed

Post by acourtjester »

here is what I did don't know if it has acceptable sharpness. Trace was done with colors, 2 colors, uncheck Smooth

Image
new trace.dxf
new trace.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Phoenix

Post by plasmanewbie »

Nice guys! Thanks
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Phoenix

Post by SegoMan DeSigns »

Twisted 1 wrote:Hi all, I am still new to tracing and have tried this a couple of times with no luck. Would someone be able to help with this please. when I try the flats of the lines are rounded at the corners. I have tried with Corel and Inkscape. Not too sure what I am doing wrong. I usually don't do too much art stuff, but a friend has asked me for this. I am willing to pay for this. Thanks in advance

Image
Go to Y/T and search for the "Doug Green" channel he has a lot of tutorials for CD
Twisted 1
2 Star Member
2 Star Member
Posts: 50
Joined: Thu Jan 28, 2010 9:47 am
Location: Ontario Canada

Re: Phoenix

Post by Twisted 1 »

Thanks everyone. That will work great
Pete
Twisted Image Customs and Fabrication
Ontario Canada
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”