Can someone do a trace of the following logo? I am wanting to make a bench to donate and this will be the back. I have tried in do a trace in inkscape and it comes out horrible so I would be grateful if someone could do a better trace.
I dont care about the dates or the chili cookoff on the bottom
Thanks
Michael
Bloomin Bluegrass Festival Logo
-
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Bloomin Bluegrass Festival Logo
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1170
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Help with trace
Here ya go. Not bridged so you'll have to handle that part for however you choose to put it into a bench.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Re: Help with trace
Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1170
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Help with trace
You're very welcome! I traced it by hand. An auto trace was never going to get it with the quality of image you had to work with.MGardner wrote:Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube