Bloomin Bluegrass Festival Logo

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Bloomin Bluegrass Festival Logo

Post by MGardner »

Can someone do a trace of the following logo? I am wanting to make a bench to donate and this will be the back. I have tried in do a trace in inkscape and it comes out horrible so I would be grateful if someone could do a better trace.
I dont care about the dates or the chili cookoff on the bottom
Thanks
Michael
bloomin bluegrass 1.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Help with trace

Post by rdj357 »

Here ya go. Not bridged so you'll have to handle that part for however you choose to put it into a bench.
Bloomin Bluegrass.jpg
Bloomin Bluegrass.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: Help with trace

Post by MGardner »

Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Help with trace

Post by rdj357 »

MGardner wrote:Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
You're very welcome! I traced it by hand. An auto trace was never going to get it with the quality of image you had to work with. :P
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”