It is currently Thu Jun 21, 2018 2:11 am

 

Image trace help

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Dickieson24
Posts: 4
Joined: Thu Nov 17, 2016 5:25 pm

Image trace help

Postby Dickieson24 » Mon Mar 19, 2018 3:25 pm

Hello all,

I have 3 patches that a friend wants engraved onto a piece of copper. Can anyone get a trace of these tree for a starting point for me?? DXF format please.

Thanks in advance,

Dan

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1435
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Image trace help

Postby little blue choo » Mon Mar 19, 2018 9:41 pm

WOW!
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Russ K
Elite Contributing Member
Elite Contributing Member
Posts: 305
Joined: Sun Dec 13, 2009 8:59 pm
Location: Tacoma, Wa.

Re: Image trace help

Postby Russ K » Fri May 11, 2018 2:16 pm

Haven't seen the Lucky Red Lions for a while. Did a lot of work for them several years ago when they were in Hawaii. As I recall about 40 helicopters with custom personal names, Flight Line, Comand etc. and a bunch of Lion coins and Punisher skulls out of the scrap left from the helicopters. A good friend of mine had a son who was in the unit who commissioned the whole shebang. Big hassle shipping to the Islands though. RK

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Russ K
Elite Contributing Member
Elite Contributing Member
Posts: 305
Joined: Sun Dec 13, 2009 8:59 pm
Location: Tacoma, Wa.

Re: Image trace help

Postby Russ K » Wed Jun 06, 2018 2:24 pm

Hi Dickieson24, Here is my interpretation of your Red Lion patch. Sorry it took so long. RK

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here



Return to “File Conversion Help Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's