Red Lions Crest

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Dickieson24
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Thu Nov 17, 2016 5:25 pm

Red Lions Crest

Post by Dickieson24 »

Hello all,

I have 3 patches that a friend wants engraved onto a piece of copper. Can anyone get a trace of these tree for a starting point for me?? DXF format please.

Thanks in advance,

Dan

Image
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Image trace help

Post by little blue choo »

WOW!
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Russ K
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 365
Joined: Sun Dec 13, 2009 8:59 pm
Location: Tacoma, Wa.

Re: Image trace help

Post by Russ K »

Haven't seen the Lucky Red Lions for a while. Did a lot of work for them several years ago when they were in Hawaii. As I recall about 40 helicopters with custom personal names, Flight Line, Comand etc. and a bunch of Lion coins and Punisher skulls out of the scrap left from the helicopters. A good friend of mine had a son who was in the unit who commissioned the whole shebang. Big hassle shipping to the Islands though. RK

Image
Russ K
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 365
Joined: Sun Dec 13, 2009 8:59 pm
Location: Tacoma, Wa.

Re: Image trace help

Post by Russ K »

Hi Dickieson24, Here is my interpretation of your Red Lion patch. Sorry it took so long. RK

Image
redlionpatch3.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1928
Joined: Fri Apr 17, 2009 11:48 am

Re: Red Lions Crest

Post by weldguy »

Thanks RK!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”