"Until Death Do Us Part" Skull Charm

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
krymis
2 Star Member
2 Star Member
Posts: 63
Joined: Tue Aug 22, 2017 9:59 am

"Until Death Do Us Part" Skull Charm

Post by krymis »

Here is a picture a friend wants converted. I tried to clean it up but no luck. I need it 24" tall single layer. any takers.

Image
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: conversion help please

Post by rdj357 »

Here ya go. Design Edge and some clicking. :lol:

Image
Death Part Heart.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

krymis
2 Star Member
2 Star Member
Posts: 63
Joined: Tue Aug 22, 2017 9:59 am

Re: conversion help please

Post by krymis »

thank you rob. I was trying to get it but just could not.
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: conversion help please

Post by rdj357 »

No problem, that's a manual trace - there was no automatic happening on that pic.
DCMW
1 Star Member
1 Star Member
Posts: 19
Joined: Mon Jul 10, 2017 7:47 am

Re: conversion help please

Post by DCMW »

rdj357 wrote:No problem, that's a manual trace - there was no automatic happening on that pic.
Robert,
I may contact you at some point to help me figure out how to do this with design edge. I have advanced design and didn't know I could do stuff like this. This looks really good! I just send a lot of stuff I need converted to some free online pages that will convert it to dxf.
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: conversion help please

Post by rdj357 »

DCMW wrote:
rdj357 wrote:No problem, that's a manual trace - there was no automatic happening on that pic.
Robert,
I may contact you at some point to help me figure out how to do this with design edge. I have advanced design and didn't know I could do stuff like this. This looks really good! I just send a lot of stuff I need converted to some free online pages that will convert it to dxf.
No problem, just message me here or email me at info@fourninetycreations.com
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2553
Joined: Thu Jul 24, 2008 11:15 am

"Until Death Do Us Part" Skull Charm

Post by plasmanewbie »

This is super cool, thanks guys!
jason.jason.p
2.5 Star Member
2.5 Star Member
Posts: 140
Joined: Mon Jan 25, 2016 8:35 pm

Re: "Until Death Do Us Part" Skull Charm

Post by jason.jason.p »

Awesome. Thanks guys!
User avatar
lazybear
2.5 Star Member
2.5 Star Member
Posts: 161
Joined: Tue Jun 06, 2017 3:49 pm
Location: Crystal Lake, IL

Re: "Until Death Do Us Part" Skull Charm

Post by lazybear »

Another nice one Robert!
User avatar
ColoradoWayne
2.5 Star Member
2.5 Star Member
Posts: 249
Joined: Fri Dec 06, 2013 4:48 pm
Location: Colorado Springs, CO

Re: "Until Death Do Us Part" Skull Charm

Post by ColoradoWayne »

Very well done, thanks for the work.
Wayne
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: "Until Death Do Us Part" Skull Charm

Post by david jordan »

Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: "Until Death Do Us Part" Skull Charm

Post by Largemouthlou »

Thank you for the hard work and share!! Sheet cam didn't seem to like the file, is it me or did anyone else have an issue with sheet cam??
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
jakeg
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Fri Jun 17, 2016 8:14 pm

Re: "Until Death Do Us Part" Skull Charm

Post by jakeg »

Thank you
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: "Until Death Do Us Part" Skull Charm

Post by rdj357 »

Largemouthlou wrote:Thank you for the hard work and share!! Sheet cam didn't seem to like the file, is it me or did anyone else have an issue with sheet cam??
I test my files to be sure they open OK in sheetcam. What trouble did it give you?
Death Part Heart Sheetcam.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: "Until Death Do Us Part" Skull Charm

Post by Largemouthlou »

Robert, I see your using the TNG version. I was trying to open in TNG development and I got the error message that this file version no longer supported.. So ran it through corel and dxf tool and got it to open but it didnt create tool paths and said problems with drawing then would freeze up and I would have to exit out.
I just re downloaded the sheetcam tng version and get the drawing to open fine but when I exit out of sheetcam I get the error message that sheet cam has encountered an internal error and must close. I remember now that is why I down loaded the TNG development version.. Thank you for taking time to ask about this.
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”