I need help converting this to a dxf file so I can cut on my plaz table. My brother bday is comen up soon and want to surprise him. Thanks for any help I can get
Airborne Crest for a Veteran
-
- 1/2 Star Member
- Posts: 5
- Joined: Mon Jun 26, 2017 9:21 pm
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Need help for a Veteran
Here's one I did for a customer a few months ago. I cut a backer to go behind it and it looked awesome and customer loved it. You can add any wording you like. My customer wanted it cut true to the patch without any extras. Hope this helps.
Rick
Rick
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1/2 Star Member
- Posts: 3
- Joined: Tue Oct 03, 2017 10:32 am
Re: Need help for a Veteran
Do you have the PCM or DXF files?
-
- 1/2 Star Member
- Posts: 7
- Joined: Tue Nov 14, 2017 5:59 pm
Re: Need help for a Veteran
I had a little play with this one. It looks quite good as a stl in 3D. (eagle.stl)
https://drive.google.com/drive/folders/ ... sp=sharing
There is a basic trace for you to clean up yourself how you want it. (eagle.dxf)
I have added a full line trace but they break the upload limt. (screaming.dxf)
If you want them I'll upload them to my shared folder, help yourself.https://drive.google.com/drive/folders/ ... sp=sharing
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4.5 Star Elite Contributing Member
- Posts: 2567
- Joined: Thu Jul 24, 2008 11:15 am
Re: Airborne Crest for a Veteran
Both look great but Rick yours is super sweet and simple man. Love it! Thanks for the share.