Im not one for requesting help. Typically I spend countless hours trying to make it work. With this image I provided, its pretty basic but due to the quality of the image, my basic PCAM is not producing "clean" looking letters.
Any assistance with this is greatly appreciated. I figured I would throw it out there and see what happens.
As stated above, Im running DesignEdge on my PCam 4x4.
If any additional information is needed, please let me know. The end result will be a simple rectangular sign similar to what is shown. I can handle adding additional segments to avoid drop outs on the letters.
Thanks,
Sam
ASSISTANCE WITH A CLEANING UP SIGN
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue May 09, 2017 1:54 am
ASSISTANCE WITH A CLEANING UP SIGN
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: ASSISTANCE WITH A CLEANING UP SIGN
Here's my try. Included in zip folder is svg, bmp and dxf. Still needs work on a couple letters, but maybe my trace will save you some work?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1172
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: ASSISTANCE WITH A CLEANING UP SIGN
Here's a DXF.
I used Paint.Net to increase DPI to 150 then enlarged to 12" or so. Then selected the background and erased it, painted the foreground black. Imported into Design Edge and smoothed to take the little bit of roughness from pixelation away.
I used Paint.Net to increase DPI to 150 then enlarged to 12" or so. Then selected the background and erased it, painted the foreground black. Imported into Design Edge and smoothed to take the little bit of roughness from pixelation away.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue May 09, 2017 1:54 am
Re: ASSISTANCE WITH A CLEANING UP SIGN
Thanks for the help. That should do the trick. Ill have to check that out Robert.