It is currently Sun Nov 19, 2017 4:47 pm

 

Need Help Please

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
goldwinger
Posts: 6
Joined: Sun Apr 30, 2017 6:45 pm

Need Help Please

Postby goldwinger » Fri Sep 08, 2017 11:24 pm

Need to convert this into a DXF file approx. 12.5" x 12.5"
any help would appreciated
vader mess logo.JPG

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
Cz_apie
Elite Contributing Member
Elite Contributing Member
Posts: 84
Joined: Sun Sep 04, 2016 2:10 pm
Location: Thabazimbi South Africa

Re: Need Help Please

Postby Cz_apie » Wed Sep 13, 2017 8:49 am

Try this one

Vader Chief Mess Fixed.JPG


Vader chief.rar



Thanks
Deon

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Plasmacam 4x4 DHC2 Table
Design Edge 4.36 Advanced Design
Advanced Height Control
Hypertherm PM 65
Mac Afric Cut 40 Plasma
Mac Afric Mig 195
Mac Afric Tig 200A
Thermax DC 200
Fulgor Butt Welder
13" Metal Lathe-Milling Machine
Rong Fu 25 Mill

goldwinger
Posts: 6
Joined: Sun Apr 30, 2017 6:45 pm

Re: Need Help Please

Postby goldwinger » Sun Sep 17, 2017 2:01 pm

Deon
Thank you very much for your help, I will try cutting this out today my fingers are crossed
I will message you and let you know it WORKED GREAT, as i'm sure it will

Thanks again
Ken S.

goldwinger
Posts: 6
Joined: Sun Apr 30, 2017 6:45 pm

Re: Need Help Please

Postby goldwinger » Sun Sep 17, 2017 6:57 pm

Deon
Thanks for trying but it didn't cut well at all
Would be easier if client could accept larger size, but won't

thanks

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 282
Joined: Sun Mar 11, 2012 4:40 pm

Re: Need Help Please

Postby rdj357 » Sun Sep 17, 2017 10:41 pm

Here you go, hope this helps. It is far from perfect but should cut. Took me a little over an hour to do - original art was poor resolution and the thing needs a ton of bridging to cut without fallouts and spindly messes. I might have missed some but it's bedtime and tomorrow is a short vacay!

Good luck!

Mess.png

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Robert Johnson
FourNinety Creations
-------------------------
PlasmaCam 5x10
Snap-n-Cut Mount
PM 65 w/ Mini Machine Torch
Router Attachment/DW611
VCarvePro & Photo VCarve
SpectraCoat Powder Coat System
7'x7'x10' DIY Powder Coat Oven

goldwinger
Posts: 6
Joined: Sun Apr 30, 2017 6:45 pm

Re: Need Help Please

Postby goldwinger » Fri Sep 29, 2017 11:09 pm

rdj357
I want to Thank you for the help that you did with this piece.
I'm new at this but hope to be able to learn some of the tricks of the trade. (I hope soon)
Again Thank You so much for your help, you don't know how much I appreciate what you did for me.

Goldwinger
Ken S.

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 282
Joined: Sun Mar 11, 2012 4:40 pm

Re: Need Help Please

Postby rdj357 » Sat Sep 30, 2017 7:20 am

No problem Ken, hope it helps to see kind of how the process goes for editing and bridging and will get you started in the right direction!
Robert Johnson
FourNinety Creations
-------------------------
PlasmaCam 5x10
Snap-n-Cut Mount
PM 65 w/ Mini Machine Torch
Router Attachment/DW611
VCarvePro & Photo VCarve
SpectraCoat Powder Coat System
7'x7'x10' DIY Powder Coat Oven


Return to “File Conversion Help Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest