converting to a cut file
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jan 14, 2017 11:30 pm
converting to a cut file
I am trying to make this into a knock down fire pit like the ford and Chevy ones on here. I cant seem to get it converted into a usable image. I use inkscape or Turbocad. Any suggestions? http://www.plasmaspider.com/download/fi ... w&id=48947
-
- 2.5 Star Member
- Posts: 224
- Joined: Sun Dec 09, 2012 6:31 am
Re: converting to a cut file
Sorry, can't release files as this was a commissioned piece. Maybe it will give you some ideas.
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jan 14, 2017 11:30 pm
Re: converting to a cut file
Thanks for the ideas. I'm really trying to figure out what the next best option is to convert it to a cut image. I've only had my table for a month. The convert from bmp/jpg options in turbocad or inkscape do not give me good clean images
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: converting to a cut file
Reflections play havoc on a programs auto trace. That's when you need to learn manual tracing.
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jan 14, 2017 11:30 pm
Re: converting to a cut file
Okay. I figured that was my only option. Thank you.
-
- 4.5 Star Elite Contributing Member
- Posts: 1649
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: converting to a cut file
Try this link there may be something you can use that is close.
http://www.dxfgraphics.net/transpp.htm
Dave Hanks
http://www.dxfgraphics.net/transpp.htm
Dave Hanks