It is currently Mon Jan 23, 2017 3:30 am

 

can someone please help me

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

can someone please help me

Postby beck77 » Thu Dec 08, 2016 11:06 am

this is a x-mas gift i cant get it to work i yousing q-cad to draw it and star cam to make the dxf.cnc file to the plasma cutter it loks like crap i cant get the lines to close please help me
oval.dxf
(436.46 KiB) Downloaded 15 times

sphurley
Elite Contributing Member
Elite Contributing Member
Posts: 277
Joined: Sat Jul 04, 2015 10:43 pm
Contact:

Re: can someone please help me

Postby sphurley » Thu Dec 08, 2016 12:00 pm

Oval2.dxf
(530.92 KiB) Downloaded 11 times
I only found four open lines. What size did you want it to be?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 210 & 350P
Hobart Tig 250
Miller Dynasty 280DX

beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

Re: can someone please help me

Postby beck77 » Thu Dec 08, 2016 12:16 pm

Thanks but This is the problem

beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

Re: can someone please help me

Postby beck77 » Thu Dec 08, 2016 12:26 pm

IMG_0147.JPG

beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

Re: can someone please help me

Postby beck77 » Thu Dec 08, 2016 12:27 pm

here is the cuttline

sphurley
Elite Contributing Member
Elite Contributing Member
Posts: 277
Joined: Sat Jul 04, 2015 10:43 pm
Contact:

Re: can someone please help me

Postby sphurley » Thu Dec 08, 2016 1:43 pm

Strange. It opens fine in Inkscape, Corel, Aspire. Can you do a SVG file?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 210 & 350P
Hobart Tig 250
Miller Dynasty 280DX

Larry83301
Elite Contributing Member
Elite Contributing Member
Posts: 1507
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho
Contact:

Re: can someone please help me

Postby Larry83301 » Thu Dec 08, 2016 1:48 pm

Try this. I found 6 pieces that were leftover when things were joined, some to small to zoom in on. Should work now.

OVAL2-A.rar
(140.36 KiB) Downloaded 8 times


Larry

beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

Re: can someone please help me

Postby beck77 » Thu Dec 08, 2016 2:52 pm

thanks so mutch for helping me i will try it tomorrow


User avatar
Capstone
Elite Contributing Member
Elite Contributing Member
Posts: 905
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: can someone please help me

Postby Capstone » Fri Dec 09, 2016 8:46 am

beck77 wrote:
IMG_0147.JPG



Wow!! That's a mess.
Phil
It's all relative...
CNC Metal Design
Cheap Royalty-Free Graphic Stock Images
DIY 4x4" water table PPL Gantry, VeloxCNC "Z" and C&CNC, MACH3, SheetCAM
HT PM45, Everlast Power MTS 251 Si Tig/MiG/Stick, WeldPAK 180


beck77
Posts: 21
Joined: Wed May 04, 2016 3:57 am
Contact:

Re: can someone please help me

Postby beck77 » Fri Dec 09, 2016 10:28 pm

THANK YOU VERY MUCH . It went from 8,000 to 1,500 LINES AND NOW WORKS. I WISH YOU A MERRY CHRISTMAS AND THANKS AGAIN FOR ALL HELP
BEST REGARDS DANIEL BACKSTROM

Bill Reibelt
Posts: 16
Joined: Wed Jun 24, 2015 9:23 pm
Contact:

Re: can someone please help me

Postby Bill Reibelt » Sun Jan 01, 2017 3:36 am

Hi Shane; I have had the same problem when converting to Vectric, Found that some of the letters in the design did not completely join. Looked a mess.
Great to see help given to others.Thank you. Bill


Return to “File Conversion Help Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest