It is currently Sun Nov 19, 2017 4:50 pm

 

Help converting image

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
User avatar
etgainey
Posts: 11
Joined: Sun Nov 30, 2008 2:17 pm
Location: Melbourne, Florida

Help converting image

Postby etgainey » Mon Nov 21, 2016 6:36 am

I'm having the hardest time with this file. Can someone please convert this to a clean vector that I could use. It would. S greatly appreciated. I don't usually have a hard time, but this has me doing a lot of work. Thank you in advance.
Melbourne, FL

User avatar
Capstone
Elite Contributing Member
Elite Contributing Member
Posts: 1003
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Help converting image

Postby Capstone » Mon Nov 21, 2016 8:10 am

You forgot to upload the pic or need to shrink it to fit the forum guidelines, and technically this request should be in the File Conversion Help Wanted forum section, not the sharing section and lastly, if you put the name or description of the file you want help with in the subject line, you might get more interested people to take a look. Sorry to troll, but in the long run, everyone will be more receptive to requests if we all follow these simple steps.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
Cheap Royalty-Free Graphic Stock Images
DIY 4x4", VeloxCNC "Z" & C&CNC, MACH3, SheetCAM
HT PM45, WeldPAK 180

User avatar
etgainey
Posts: 11
Joined: Sun Nov 30, 2008 2:17 pm
Location: Melbourne, Florida

Re: Help converting image

Postby etgainey » Mon Nov 21, 2016 11:21 am

Thanks, Will do.

Eddie
Melbourne, FL

User avatar
etgainey
Posts: 11
Joined: Sun Nov 30, 2008 2:17 pm
Location: Melbourne, Florida

Re: Help converting image

Postby etgainey » Mon Nov 21, 2016 11:23 am

hopefuly this uploads
201201190957240_Policia_LOGO_jpg_jpg.png

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Melbourne, FL

User avatar
Capstone
Elite Contributing Member
Elite Contributing Member
Posts: 1003
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Help converting image

Postby Capstone » Mon Nov 21, 2016 1:02 pm

Good luck with that...
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
Cheap Royalty-Free Graphic Stock Images
DIY 4x4", VeloxCNC "Z" & C&CNC, MACH3, SheetCAM
HT PM45, WeldPAK 180

brigl4
Posts: 2
Joined: Thu Nov 10, 2016 1:26 pm

Re: Help converting image

Postby brigl4 » Mon Nov 21, 2016 2:21 pm

I dont have time to fine tune it but here is a rough translation to .dxf. If i have more time later on i can add stencil text and smooth it out.

brigl4
Posts: 2
Joined: Thu Nov 10, 2016 1:26 pm

Re: Help converting image

Postby brigl4 » Mon Nov 21, 2016 2:22 pm

Puerto rico police.dxf
Ive never attached anything so let me know if its visible or not

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2795
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Help converting image

Postby acourtjester » Mon Nov 21, 2016 2:36 pm

Here is some help using inkscape and the trace "color quantization with a number about 14 colors. Then with it highlighted remove the fill and give it a stroke about 0.010" for thin lines. The break it apart under path to get each item separated so you can delete duplicate lines down to one per item.
I would make it a multi-layer with cutting the letter to be put on top of the shield and make the people separate too. If you play with the number you can change the detail of the items when you have them separate copy them to another inkscape page and work on other parts to get them better then copy them to the other page to. making the original larger helps to separate the items too.
have fun
puerto2.jpg

puerto1.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
etgainey
Posts: 11
Joined: Sun Nov 30, 2008 2:17 pm
Location: Melbourne, Florida

Re: Help converting image

Postby etgainey » Mon Nov 21, 2016 4:33 pm

That's about the same results that I have as well using Inkscape. Thank you for trying
Melbourne, FL

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2795
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Help converting image

Postby acourtjester » Mon Nov 21, 2016 5:27 pm

It can be done if you spend a little time on it. Here are some of the things I have assembled from a drawing. They have a background and then separate parts painted and attached to the background for a layered effect.
miami hurricanes logo.jpg

DSCN2110.JPG

DSCN2111.JPG

DSCN2250.JPG

Man Cave 2 (1).JPG

pelican (3).JPG

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
RobinHillMachine
Elite Contributing Member
Elite Contributing Member
Posts: 203
Joined: Mon Sep 19, 2016 1:32 pm
Location: Pennsylvania
Contact:

Re: Help converting image

Postby RobinHillMachine » Tue Nov 22, 2016 12:00 pm

Try this one. You'll have to add the text.

User avatar
RobinHillMachine
Elite Contributing Member
Elite Contributing Member
Posts: 203
Joined: Mon Sep 19, 2016 1:32 pm
Location: Pennsylvania
Contact:

Re: Help converting image

Postby RobinHillMachine » Wed Nov 23, 2016 10:50 am

Did the badge I posted work for you?

cncdaver
Posts: 27
Joined: Wed Mar 22, 2017 7:32 pm

Re: Help converting image

Postby cncdaver » Mon Aug 21, 2017 8:51 am

Anybody know how to do a DXF file single layer for the Miami hurricanes ibis ?


Return to “File Conversion Help Wanted”

Who is online

Users browsing this forum: No registered users and 2 guests