I need the top and bottom arc traced if possible
anybody want to take a stab at tracing?
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7843
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: anybody want to take a stab at tracing?
Another poster had suggested laying paper over thing to trace then use a scanner to load it into your computer then use Inkscape trace to convert to a DXF or SVG file. If you do that you can scale it to what ever size you want.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
Re: anybody want to take a stab at tracing?
this is a pic that a friend sent me to see if i could cut it out... I use torchmate cad, but the scanning feature of this software does not like this.just a bunch of squiggly lines
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1180
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: anybody want to take a stab at tracing?
I'm trying to understand what you're after. Just the top and bottom arches with text or the whole thing?
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
-
- 2 Star Elite Contributing Member
- Posts: 95
- Joined: Thu Jan 09, 2014 12:36 am
Re: anybody want to take a stab at tracing?
It is a start.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
Re: anybody want to take a stab at tracing?
Thanks a million noclinkers.. i was looking for the top and bottom with text... You nailed it...I wish i could trace like you do
-
- 2 Star Elite Contributing Member
- Posts: 95
- Joined: Thu Jan 09, 2014 12:36 am
Re: anybody want to take a stab at tracing?
Just practice. I am using TMCad like you are.
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
Re: anybody want to take a stab at tracing?
I will take that advice, knowing that you use tm cad ad have those results. most things trace pretty good but when I try to trace patches and such the lines are all over the place.
-
- 2 Star Elite Contributing Member
- Posts: 95
- Joined: Thu Jan 09, 2014 12:36 am
Re: anybody want to take a stab at tracing?
That came out wrong. I meant that I just practice to get to where I can use the program to do almost anything I need to.
I wasn't advising you to do anything, that is up to you.
I wasn't advising you to do anything, that is up to you.