Price on a used Arclight 9600?

Arclight Hardware discussion forum.
Post Reply
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Price on a used Arclight 9600?

Post by Scratch »

My brother is thinking about buying a used Arclight 9600 table with Hypertherm 65.
It has:
Tubing cutter attachment,
HYT SIM kit,
Double slats option,

Looks like new its about 17749.00

His daughter used to run it so he knows its history. The guy is upgrading to a laser table. They're about 3 years old. Any idea how much it's worth used? I told him I'd ask the board here.
I think I'm the oldest 10 year old boy on the forum...
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Price on a used Arclight 9600?

Post by tnbndr »

Anything used is worth what someone is willing to pay.
If it was me and it looks like everything works and was taken care of I would offer somewhere in the $11,000 range.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Price on a used Arclight 9600?

Post by little blue choo »

I would start out offering half of retain on used equipment. Remember you're not only getting used equipment but NO WARRANTY. If something happens to it in a week you're stuck with whatever it cost to repair. A new hypertherm could cost you another 3K.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Price on a used Arclight 9600?

Post by tcaudle »

Maximum cost to repair (replace the complete electronics and motors ) is about 2500. Usually a repair is a LOT less.
Post Reply

Return to “Arclight Dynamics”