It is currently Tue May 22, 2018 9:34 am

 

Price on a used Arclight 9600?

Arclight Hardware discussion forum.
User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 469
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Price on a used Arclight 9600?

Postby Scratch » Fri Dec 29, 2017 3:16 pm

My brother is thinking about buying a used Arclight 9600 table with Hypertherm 65.
It has:
Tubing cutter attachment,
HYT SIM kit,
Double slats option,

Looks like new its about 17749.00

His daughter used to run it so he knows its history. The guy is upgrading to a laser table. They're about 3 years old. Any idea how much it's worth used? I told him I'd ask the board here.
I think I'm the oldest 10 year old boy on the forum...

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1390
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Price on a used Arclight 9600?

Postby tnbndr » Sat Dec 30, 2017 12:16 pm

Anything used is worth what someone is willing to pay.
If it was me and it looks like everything works and was taken care of I would offer somewhere in the $11,000 range.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1428
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Price on a used Arclight 9600?

Postby little blue choo » Sat Dec 30, 2017 5:12 pm

I would start out offering half of retain on used equipment. Remember you're not only getting used equipment but NO WARRANTY. If something happens to it in a week you're stuck with whatever it cost to repair. A new hypertherm could cost you another 3K.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

tcaudle
Posts: 948
Joined: Tue Feb 28, 2012 6:47 pm

Re: Price on a used Arclight 9600?

Postby tcaudle » Sun Dec 31, 2017 3:11 pm

Maximum cost to repair (replace the complete electronics and motors ) is about 2500. Usually a repair is a LOT less.


Return to “Arclight Dynamics”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's