It is currently Thu May 24, 2018 1:35 pm

 

Hypertherm Powermax 65 test fire

Arclight Hardware discussion forum.
nostalgic design
Posts: 1
Joined: Tue Sep 06, 2016 1:39 pm

Hypertherm Powermax 65 test fire

Postby nostalgic design » Tue Sep 13, 2016 9:09 pm

Trying to test fire plasma cutter on new arclight table. Everything appears to be hooked up. Only thing I see is red" hold motion" button lights up on computer screen when I hit fire button. No error message on plasma cutter. Thanks in Advance!

sphurley
Elite Contributing Member
Elite Contributing Member
Posts: 419
Joined: Sat Jul 04, 2015 10:43 pm

Re: Hypertherm Powermax 65 test fire

Postby sphurley » Tue Sep 13, 2016 10:46 pm

Do you hear the relay in the PWM module "click" when you try and test fire? Are you using a machine torch or a hand torch?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX

drossmaker
Posts: 53
Joined: Tue Oct 12, 2010 2:36 am
Location: Bend, Oregon
Contact:

Re: Hypertherm Powermax 65 test fire

Postby drossmaker » Fri Sep 16, 2016 12:02 pm

nostalgic design,

sphurley has some of the right things to look for. Thanks for giving us a call and getting this resolved. It always easier to 'look' at the machines over the phone or by remote access. The end result of this was no air pressure to the plasma. Glad your up and running Nostalgic Design!!

~drossmaker


Return to “Arclight Dynamics”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's