Table Ordered!

Arclight Hardware discussion forum.
Post Reply
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Table Ordered!

Post by Brew Worx »

:D :D :D

We are happy as a clam..... Put in the order with Steve yesterday. Scheduled training for 2 weeks from now. They informed me that I would be training on my table if all goes well..... SWEET!

I did get the tube cutting setup as the May special. Just in time.... Now the metal cutting just got real.

Epoxy on floor this weekend. Air and power is ready.

New table in Chicagoland........ ready ready ready....

Just in case Jim reads... Hypertherm 45 in the order.....
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Table Ordered!

Post by steel 35 »

Will you take me as your kid for the training? Please. :mrgreen:
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Re: Table Ordered!

Post by Brew Worx »

Sure.

Arclight.... Table for 3 with a booster seat.
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
drossmaker
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Tue Oct 12, 2010 2:36 am
Location: Bend, Oregon
Contact:

Re: Table Ordered!

Post by drossmaker »

Brew Worx,

We're stoked to be building a table for you! Congrats!!!

~drossmaker
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Re: Table Ordered!

Post by Brew Worx »

One more long day at work and then off to Bend for some good ol training! !!

:D :D :D

baby is almost born!
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Re: Table Ordered!

Post by Brew Worx »

Its a Boy!!!!
:mrgreen:

Completed training with Joe today at the Bend Oregon Headquarters!

Awesome customer service and great team. Beautiful part of the country. Hard to believe anyone can live and actually work there. I would get nothing done.
SO Beautiful

Thanks Arclight Team
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: Table Ordered!

Post by gamble »

Congrats neighbor. Where in Chicago are you?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Re: Table Ordered!

Post by Brew Worx »

Oswego. Just south of Aurora...
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
drossmaker
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Tue Oct 12, 2010 2:36 am
Location: Bend, Oregon
Contact:

Re: Table Ordered!

Post by drossmaker »

Brew Worx
It was a pleasure meeting the both of you. Joe had a great time during the training; he loves meeting his fellow mid-westerners! We look forward to seeing you Worx!

~drossmaker
Brew Worx
2.5 Star Member
2.5 Star Member
Posts: 109
Joined: Thu Jan 29, 2015 12:52 pm

Re: Table Ordered!

Post by Brew Worx »

Table finally in its new home.

To the Arclight family: Joe's training and Scott's videos created an important result! I unloaded the table off the car trailer into the garage. 3 hours later, the table was up and running around just like training.

I didn't load the water into the bed so within 30 minutes, I can be cuttingon water on my second evening having the machine!

GREAT machine and total turn key package folks!

Granted, I could have had the table fully cutting with water last night. BUT, I had to stop early. You know, with the 2015 Stanley Cup game 6 was on and with the Blackhawks taking the win and the CUP, I stopped early.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800 :D :D
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
draperpcs
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Thu Jun 18, 2015 12:44 am

Re: Table Ordered!

Post by draperpcs »

your going to love your table.... I've had two other brands of table before I got the arclight table and arclight is by far the best quality.
One thing I recommend is to make sure you get an air dryer... your consumables will last way longer.
Have Fun!!!
Post Reply

Return to “Arclight Dynamics”