It is currently Tue Dec 12, 2017 2:53 pm

 

Having issues cutting Stainless... Jim/ Ross Help!

Trucut CNC Hardware discussion forum
SSLLC
Posts: 15
Joined: Mon Jun 16, 2014 7:10 pm

Having issues cutting Stainless... Jim/ Ross Help!

Postby SSLLC » Mon Jun 16, 2014 7:27 pm

So I took it upon myself to try cutting some 20GA stainless to go on a boat trailer side rails with boats name on it. My issue is the pilot arc lights then goes out. I have moved and cleaned my ground twice and took tip off and inspected. Appears fine. I am using 45amp fine cut tip unshielded. Everything set per manual and about 30% under IPM from owners manual. I have never cut stainless before on a plasma table. With that being said I could be making a simple mistake that Im not aware of. Other info - powermax 65 @ 40 amps, 45 amp unshielded fine cut tip, pierce .08 cut .02 delay .1 and feed rate 160. @Ross and Cindy - This machine is awesome very pleased with it!

cindy carlisle
Posts: 129
Joined: Wed Oct 02, 2013 9:47 am
Location: Jackson, TN
Contact:

Re: Having issues cutting Stainless... Jim/ Ross Help!

Postby cindy carlisle » Tue Jun 17, 2014 11:44 am

I think Ross covered this via email , please let us know how it works for you :)

Thank you, you guys "Rock"
I am going to share your first job with your PM65 and our TruCut CNC

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Cindy
http://www.trucutcnc.com
615-290-6260


Return to “Trucut CNC”

Who is online

Users browsing this forum: No registered users and 1 guest