Bigger Screen For Mach3

Share tips and tricks regarding cut cutting, material handling, metal finishing, marketing, or anything you find helpful.
Post Reply
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7754
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Bigger Screen For Mach3

Post by acourtjester »

Here is a way to enlarge the viewing screen in Mach 3 many already know about this but I thought I would pass it on :lol:
I bought a screenset for routers and the guy told me how to do it. You start Mach 3 a normal and then enlarge the outside window that Mach is in.
The Mach display will stay the same but the window is larger. Go into config and the general config and down the bottom there is a small check box for Auto screen enlarge put a check in it. Then exit Mach 3 and then restart it, the display will now fill the outer window frame :D
big screen.jpg
big screen 2.jpg
big scren 3.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Big Screen

Post by little blue choo »

Good to know. Thanks acourtjrester

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
RAD
2 Star Member
2 Star Member
Posts: 81
Joined: Fri Aug 28, 2015 3:17 pm

Re: Big Screen

Post by RAD »

Was looking for a way to do this, thanks
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Big Screen

Post by SeanP »

Never knew that, I made my own screenset to fit my monitor, tried plenty of times before to make it fit, thanks for passing it on.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Post Reply

Return to “Tech Tips From Other Members”