It is currently Sun Dec 17, 2017 10:42 am

 

Big Screen

Share tips and tricks you know of in this forum. Plasma cutting, material handling, metal finishing, marketing, or anything that you feel is helpful.
User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2821
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Big Screen

Postby acourtjester » Wed Jul 19, 2017 2:23 pm

Here is a way to enlarge the viewing screen in Mach 3 many already know about this but I thought I would pass it on :lol:
I bought a screenset for routers and the guy told me how to do it. You start Mach 3 a normal and then enlarge the outside window that Mach is in.
The Mach display will stay the same but the window is larger. Go into config and the general config and down the bottom there is a small check box for Auto screen enlarge put a check in it. Then exit Mach 3 and then restart it, the display will now fill the outer window frame :D
big screen.jpg

big screen 2.jpg

big scren 3.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1312
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Big Screen

Postby little blue choo » Wed Jul 19, 2017 10:46 pm

Good to know. Thanks acourtjrester

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

RAD
Posts: 73
Joined: Fri Aug 28, 2015 3:17 pm

Re: Big Screen

Postby RAD » Fri Jul 21, 2017 6:17 pm

Was looking for a way to do this, thanks
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD

User avatar
SeanP
Elite Contributing Member
Elite Contributing Member
Posts: 726
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Big Screen

Postby SeanP » Sat Jul 22, 2017 3:45 pm

Never knew that, I made my own screenset to fit my monitor, tried plenty of times before to make it fit, thanks for passing it on.
Powermax 45XP
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery


Return to “Tech Tips”

Who is online

Users browsing this forum: No registered users and 1 guest