It is currently Wed Aug 23, 2017 5:17 pm

 

How do you attach individually cut letters?

Share tips and tricks you know of in this forum. Plasma cutting, material handling, metal finishing, marketing, or anything that you feel is helpful.
motoguy
Posts: 885
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA
Contact:

How do you attach individually cut letters?

Postby motoguy » Mon Jun 12, 2017 7:59 pm

Just finished up this sign for a family member. He's actually giving it as a gift. It's one of the first things I've done with individual positive-space letters. I attached them using VHB, and it took FOREVER to do. I put VHB on the back of the letters, and cut out a paper "template" on my vinyl cutter for letter placement. The whole process took far longer than I expected.

What is your trick to quickly attach (and properly align) individual, positive space/layered letters? I love the look, but I need to find a more efficient method to be cost effective.

20170612_170009_1497306691452_resized.jpg
20170612_170423_1497306693641_resized.jpg
20170612_172856_1497306700848_resized.jpg
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

littlefatbuddy
Posts: 160
Joined: Thu Oct 16, 2014 6:10 pm
Contact:

Re: How do you attach individually cut letters?

Postby littlefatbuddy » Mon Jun 12, 2017 9:33 pm

Lay the letters on the sign and place them where you want them or measure out where you want them. Then lay out some guidelines with tape. In my opinion, you only need a fraction of that much tape. With the T, for example, I would have put a small piece on the top and a small piece on the bottom just to make sure it stayed straight. The O and U would have probably got a small piece on each side and one on top, similar to the small piece on the R. I personally don't let it go all the way to the edge just because I think it looks better. I try to place the tape so it maintains an even height off the base piece. Also, I usually run my razor knife down the center of the roll to make the more narrow pieces and then pull the tape off the roll.

hemichargersrt8
Elite Contributing Member
Elite Contributing Member
Posts: 120
Joined: Sun Dec 09, 2012 6:31 am
Contact:

Re: How do you attach individually cut letters?

Postby hemichargersrt8 » Sun Jun 18, 2017 9:17 am

When designing a sign with positive letters, I create and cut basically a template with the letters properly positioned and then use the skeleton to position the individual letters. Sometimes it is necessary to hand trim some of the skeleton letter profiles to make letter positioning easier.
Attachments
DODGE TEXT letters.JPG
1-DODGE TEXT spacing.JPG
2-DODGE TEXT scrap.JPG
3-DODGE TEXT scrap trimmed.JPG

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1191
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: How do you attach individually cut letters?

Postby little blue choo » Sun Jun 18, 2017 9:49 am

Great idea and yet so simple. Thanks Hemi.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape


Return to “Tech Tips”

Who is online

Users browsing this forum: No registered users and 2 guests