I just finished a 3D star it has 10 parts to make the star and I was running things through my head as to how to hold the parts to weld them. Then I remembered I bought some magnetic holding devices some time back. I fished them out and they worked great, these came from Strong Hand as a set of 4 holders. http://www.stronghandtools.com/strongha ... padkit.php
here is the post about the 3 D star but the file did not have the internal cuts so I added them in Inkscape I did not want to bend the metal so I made it from 10 parts. http://www.plasmaspider.com/viewtopic.p ... hilit=star
Magnetic Holding device
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Magnetic Holding device
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Magnetic Holding device
You made a fine job of that Tom!
Handy way to hold the parts, might try one of those.
Handy way to hold the parts, might try one of those.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
