Powermax Shield Cap Condition

Share tips and tricks regarding cut cutting, material handling, metal finishing, marketing, or anything you find helpful.
Post Reply
User avatar
Team Tracker
2.5 Star Member
2.5 Star Member
Posts: 104
Joined: Thu Nov 18, 2010 7:36 pm

Powermax Shield Cap Condition

Post by Team Tracker »

We are all familiar with replacing electrodes and nozzles on a regular basis and I have found that many operators overlook the other consumable items in the torch such as the shield cap.
pmax-shield.jpg
The shield is subjected to a lot of abuse and the orifices in the shield can become plugged with slag. Be sure to inspect your shield by holding it up to the light and confirming the orifices are clear each time you replace your nozzle and/or electrode and replace it if you see any problems. Your torch is very complex and everything must remain in good condition or you will see cut quality degrade just as it would if any of the other consumable items were overused. Keep your shield fresh and be another step closer to consistent quality cuts.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

1-800-590-7804
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Powermax Shield Cap Condition

Post by CNCCAJUN »

This is true . . . I used to get a lot ohmic errors until I started inspecting the bottom of the shield.

I have come to find out when cutting hot rolled you can accumulate an 1/16" thick ring of crude rather quickly.

So now your ohmic sensing is now worthless . . . you will get an error . .

Solution - I remove my cap, inspect, clean as needed . . . What works for me a deck of cards size sanding sponge.

One light quick pass removes crude and restore your conductivity . . .now ohmic works . . . :D

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Powermax Shield Cap Condition

Post by SeanP »

I find a set of welding nozzle cleaning wires invaluable for maintaining the nozzle, i'm still getting good results from the original shield after 12 months now, had a couple of proper blockages and managed to free those.
$_12.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Powermax Shield Cap Condition

Post by Capstone »

just cleaned mine yesterday on my PM45. I wasn't getting good cuts and sure enough it was the consumables.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
OTHill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 573
Joined: Fri Jul 20, 2012 12:08 pm

Re: Powermax Shield Cap Condition

Post by OTHill »

I keep some dental picks handy for cleaning the shield.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 689
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: Powermax Shield Cap Condition

Post by plain ol Bill »

Dental picks come in handy for a lot of things. Next time you drop by your welding supply store ask them about a set of tip DRILLS. The drills come with a handy collet style holder. They will save consumables that even tip cleaners won't.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Post Reply

Return to “Tech Tips From Other Members”