Advice For Pricing

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Oakleys
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Mar 08, 2018 1:30 am

Advice For Pricing

Post by Oakleys »

I was wondering what you all would charge for this personalized custom 24 x 24 sign with high quality automobile paint and clear coat. And also with just standard normal paint. Thanks in advance for the help.
miranda.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2553
Joined: Thu Jul 24, 2008 11:15 am

Re: Advice For Pricing

Post by plasmanewbie »

I opened your file but CorelDraw didn't like it. This is what I saw
Capture.PNG
Maybe someone else can chime in with better success than me. Sorry.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Advice For Pricing

Post by rdj357 »

I'd be at $155 in 12 gauge steel with single color, one coat powder coat.

163 pierces and 540 inches of cutting there.
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Advice For Pricing

Post by little blue choo »

Never seen a SVG I couldn't open in Inkscape, until now. I just get a black blob

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Advice For Pricing

Post by rdj357 »

I used my vinyl software's import SVG function and then exported a DXF so I could open in Design Edge. Quite a few intersections and crossovers that are probably messing with Inkscape.
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”