Air pressure problem

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Davehunterconrad
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Sun Jan 21, 2018 3:37 pm

Air pressure problem

Post by Davehunterconrad »

I have a hypertherm 1250 and for some reason it started losing air pressure when I cut. My air compressor is working fine and holding around 150 lbs of air. When I start the cut the bar drops down to nothing after about 10 sec. I stop the program and it Immediately regains 80 lbs. Seems like something is messed up with the torch. Any suggestions?
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Air pressure problem

Post by WyoGreen »

Sounds like an air obstruction to me. Do you have an air pressure gauge right at the air inlet to the Hypertherm to see what is going on there?

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”