Price for this...?

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Walshmetalworks
1 Star Member
1 Star Member
Posts: 12
Joined: Fri Feb 17, 2017 12:10 am

Price for this...?

Post by Walshmetalworks »

Hello all, I'm making as sign that is 36x12, 417 inches, 42 pierces. Cut out of 14g steel. Just wondering what some of you would charge for a sign this size. Thanks
Plasmacam DHC2 4x4
Hypertherm Powermax 65
Lincoln PowerMig 255
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Price for this...?

Post by tnbndr »

That all depends on the finish required. Just the sign cut out of raw steel and dross cleaned up probably $150.00
If primed and painted add another $75, powder coated add $150, Steel FX finished with clear coat add $100. But you have to determine what will sell in your area.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
zj2203
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Sep 04, 2016 10:47 pm

Re: Price for this...?

Post by zj2203 »

Bare metal $60. Powder coated $85-90
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”