What would you charge? 16 GA

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
DieselMonkey
2.5 Star Member
2.5 Star Member
Posts: 118
Joined: Wed May 16, 2012 5:31 pm
Location: San Marcos, Texas

What would you charge? 16 GA

Post by DieselMonkey »

Just wondering what everyone else would charge for 5 18x12 (216 sq inches) signs with 192 inches of cut and 16 pierces in 16 GA material
Few problems in life can't be solved with the generous application of a cutting torch and a taco truck.... or something like that.....
tirediron
2.5 Star Member
2.5 Star Member
Posts: 105
Joined: Tue Feb 08, 2011 11:02 am
Location: Haslet, TX

Re: What would you charge? 16 GA

Post by tirediron »

Using the Excel spreadsheet that I found here on PlasmaSpider and making some adjustments namely in the price of the sheet metal I would charge $21.97 for the 5 pieces. That is also an adjustment point - meaning if I cut 6 the cost would drop to $20.05. Hope this helps.

G
DieselMonkey
2.5 Star Member
2.5 Star Member
Posts: 118
Joined: Wed May 16, 2012 5:31 pm
Location: San Marcos, Texas

Re: What would you charge? 16 GA

Post by DieselMonkey »

I figured I was on point with it, I quoted $23, damn tire kickers
Few problems in life can't be solved with the generous application of a cutting torch and a taco truck.... or something like that.....
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: What would you charge? 16 GA

Post by gamble »

DieselMonkey wrote:I figured I was on point with it, I quoted $23, damn tire kickers
$23 for just the cut? Or with material? What about finishing ?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”