Plasma Pricing app...

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

This is a Windows issue - it stores support files in a folder called application data hidden away somewhere in documents and settings.

Try a search for a file called "MetalTypes.txt" I think you will find you have two copies of it.

Not much i can do about it but i did read somewhere that it can be turned off so it only stores things where they should be.

I still use XP and it stores files where i tell it ;)
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Plasma Pricing app...

Post by motoguy »

That's enough to start with! Thanks.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

Motoguy:

Do a search of your hard drive for the files stated above.
I can edit the units, materials, etc. but when I click on the edit material data files directly I get a different file than what the program shows.
I found out the program is storing the edited data in this location:
C:\Users\tnbnd\AppData\Local\VirtualStore\Program Files (x86)\Plasma Estimator V3
But the program files are located here:
C:\Program Files (x86)\Plasma Estimator V3

I have not found time to figure out how to have it just overwrite the original file
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Plasma Pricing app...

Post by motoguy »

tnbndr wrote:Motoguy:

Do a search of your hard drive for the files stated above.
I can edit the units, materials, etc. but when I click on the edit material data files directly I get a different file than what the program shows.
I found out the program is storing the edited data in this location:
C:\Users\tnbnd\AppData\Local\VirtualStore\Program Files (x86)\Plasma Estimator V3
But the program files are located here:
C:\Program Files (x86)\Plasma Estimator V3

I have not found time to figure out how to have it just overwrite the original file
Ok, that's where the info is at on my machine (Win7). Apparently, starting with Vista it was decided that programs don't write to the Program Data folder, but rather to the App Data folder. Shared access, multiple users, blah blah blah.

http://www.rajapet.com/2013/12/its-2013 ... ready.html

I'm not sure how to force the program to write to the folder pointed at when the "edit material data files directly" button is pushed. For now, I'll just put a shortcut to the C:\Users\Owner\Appdata\Local\VirtualStore\Program Files\Plasma Estimator V3 on my desktop, and click on it to directly edit metal info. Same place for labor, etc.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

When I get a chance, I'll add a target path to the edit buttons so you can tell the app where your data is.

Should fix it.
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

When I get a chance, I'll add a target path to the edit buttons so you can tell the app where your data is.Should fix it.
Please post when update is available.
Thanks
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

Done, it will tell you to go to setup, use the list on the lower right corner of the setup page, self explanatory :)

Hopefully that will enable the locations to be set where you want them now.

:)
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

Dave:
See pics. When selecting the file tree it does not show all of the folders available. The appData folder is not in the selection of the file tree shown.

File tree Windows Explorer
File Tree Thru Windows Explorer.JPG

File tree thru Plasma Estimator
File Tree thru Plasma Estimator.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

Man, do i hate Windows :)

Back to the drawing board :(
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

Sorry to be the bearer of bad news!!! :roll:
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

Not a problem, you don't realise how insular your little world is until you start dealing with computer setups in the big outside world :)

Try the version on there now, I have radically altered the path choice method, you can now use the folder explorer list OR paste whatever path you want into the text box, press save and it will use that.

Make sure the path entered ends in the target folder not a file or "\" etc

Hopefully the new windows will allow copy paste of folder paths??

dave
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

Dave:
I downloaded the new file and going through the file structure it still does not show all the folders as above. So I went through Windows Explorer and copied the path to the program, clicked save, closed the program and came back in.
When I click on the Edit Materials directly it still goes to the old file path and pulls up the original material list, in metric!!!
New File Find Structure.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

That is so annoying - windows is totally overriding what i am asking it to do then.

I am afraid I cannot fix this I think, windows has beaten me :(
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

Not a big deal, I don't edit the files directly, so as long as the list is finding the materials file and cost files as I edit them it is fine.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Plasma Pricing app...

Post by motoguy »

Agreed. I appreciate all you have done to bring this to life! It's a VERY useful tool, and I use it for my quotes. If this is the only hiccup with it, it's something I can live with! lol I'll simply create a shortcut to the appropriate folder, and edit that way.

Thanks again!

ETA: On my 64 bit Win7 machine, the "edit materials data file directly" button works fine. On my 32 bit machine (one I use as my table controller), it does not and I need to create the shortcuts.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Plasma Pricing app...

Post by motoguy »

Would it be possible to have an option where the per-pierce price is tied to material selling price (per-inch)? In other words, per-pierce charge is the same as cut charge (per inch)?

And while I'm being picky...an option to round the charges up to 2 digits, vs 4? Ie, material selling price of .0277 becomes .03?

Both of these can be changed manually. Automation would be faster, and I'd be less likely to forget!

Thanks!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

Will have a look next time I get a bit of spare time ;)
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

Ok, had a little play, I have altered the editing of the material data file, it's all done on the setup page now so no need to mess with finding files etc, try that out.

Will look at the suggestions above shortly
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Plasma Pricing app...

Post by tnbndr »

That works!!!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

:)
MHACreations
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Wed Dec 18, 2013 8:35 pm
Contact:

Re: Plasma Pricing app...

Post by MHACreations »

is there a Mac version of this?
User avatar
exapprentice
3 Star Member
3 Star Member
Posts: 357
Joined: Mon Jul 06, 2015 1:57 pm
Location: Wiltshire, UK

Re: Plasma Pricing app...

Post by exapprentice »

Come on Dave, get a grip, and breath, MHACreations is only asking :D

What is the record for the most number of pages for a thread :?:
Best Regards to all
Exapprentice :D
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting :(
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

MHACreations wrote:is there a Mac version of this?

Hi

no I'm afraid not, MAC programming is something I never got to grips with and I think I'm beyond learning it now :D
davek0974
4 Star Member
4 Star Member
Posts: 764
Joined: Wed Aug 13, 2014 8:30 am
Location: Hertfordshire, England
Contact:

Re: Plasma Pricing app...

Post by davek0974 »

exapprentice wrote:Come on Dave, get a grip, and breath, MHACreations is only asking :D

What is the record for the most number of pages for a thread :?:

Can't keep a good thread down :D :D :D
Brett
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Apr 13, 2016 11:27 pm

Re: Plasma Pricing app...

Post by Brett »

Thanks for the program! I downloaded it. Had some problems getting to unzip... but was able to get it to work. It does not seem to save the entered data (except material costs) such as labor rates, pierce costs etc. Any suggestions?

I am a few months into working with our Archlight plasma 4x8 table. Looking for a good resource like this to help price work better.

Thanks!
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”