It is currently Sun May 20, 2018 3:50 pm

 

i want to buy consumables from them

Information on plasma cutting nozzles, electrodes, and other consumables.
hardsteel
Posts: 51
Joined: Fri Jan 13, 2012 11:02 am
Location: libya , zwara

i want to buy consumables from them

Postby hardsteel » Thu Apr 04, 2013 5:52 pm

hi guys .
any one deal before with this distributor .any idea about them
http://www.hypermaxonline.com/
Last edited by hardsteel on Fri Apr 05, 2013 6:32 am, edited 1 time in total.

Stout
Elite Contributing Member
Elite Contributing Member
Posts: 254
Joined: Wed Apr 29, 2009 8:14 am
Location: Helotes, TX

Re: i want to buy consumables from them

Postby Stout » Thu Apr 04, 2013 6:26 pm

Don't know them. Damn good pricing though. Keep us informed.
Victor Simonis
Grey Forest MetalCraft
Helotes, TX 78023
210-872-2622
Sector Technologies Photon 5x10 water table machine with Hypertherm Micro Edge Controller, Powermax 105

JEd
Posts: 137
Joined: Mon Feb 07, 2011 11:27 am

Re: i want to buy consumables from them

Postby JEd » Thu Apr 04, 2013 7:01 pm

Never dealt with them, but their prices seem to be exactly the same as Harris Welding, which I and others have bought from several times.

http://www.harrisweldingsupplies.com/pl ... ables.aspx

kbenz
Posts: 427
Joined: Sun Oct 31, 2010 1:26 pm
Location: Kannapolis,NC
Contact:

Re: i want to buy consumables from them

Postby kbenz » Thu Apr 04, 2013 7:17 pm

JEd wrote:Never dealt with them, but their prices seem to be exactly the same as Harris Welding, which I and others have bought from several times.

http://www.harrisweldingsupplies.com/pl ... ables.aspx


hard to beat harris prices and shipping
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm65 machine torch
Millermatic 210
Spoolmatic 30a w/ WC-115a
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl

Stout
Elite Contributing Member
Elite Contributing Member
Posts: 254
Joined: Wed Apr 29, 2009 8:14 am
Location: Helotes, TX

Re: i want to buy consumables from them

Postby Stout » Thu Apr 04, 2013 9:07 pm

kbenz wrote:hard to beat harris prices and shipping


Why? Do they ship free?
Victor Simonis
Grey Forest MetalCraft
Helotes, TX 78023
210-872-2622
Sector Technologies Photon 5x10 water table machine with Hypertherm Micro Edge Controller, Powermax 105

kbenz
Posts: 427
Joined: Sun Oct 31, 2010 1:26 pm
Location: Kannapolis,NC
Contact:

Re: i want to buy consumables from them

Postby kbenz » Thu Apr 04, 2013 9:30 pm

Stout wrote:
kbenz wrote:hard to beat harris prices and shipping


Why? Do they ship free?


and fast
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm65 machine torch
Millermatic 210
Spoolmatic 30a w/ WC-115a
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl

hardsteel
Posts: 51
Joined: Fri Jan 13, 2012 11:02 am
Location: libya , zwara

Re: i want to buy consumables from them

Postby hardsteel » Fri Apr 05, 2013 7:02 am

can you confirm me if their consumable are Genuine? in fact i have ordered Chinese consumables before , they look like from outside the same with Genuine , you can make cutting with but you can not reach even the recommended hypertherm parameters (speed cutting ), did you have experiences with Harris Welding in cnc cutting ? .
thanks

jimcolt
Elite Contributing Member
Elite Contributing Member
Posts: 2879
Joined: Mon Jul 20, 2009 11:18 pm
Location: New Hampshire

Re: i want to buy consumables from them

Postby jimcolt » Fri Apr 05, 2013 7:36 am

Hypermax is a genuine distributor of Hypertherm products...they are an independant distributor, not owned by Hypertherm. Thay can only supply and ship to the United States.

Jim Colt Hypertherm


hardsteel wrote:hi guys .
any one deal before with this distributor .any idea about them
http://www.hypermaxonline.com/

jimcolt
Elite Contributing Member
Elite Contributing Member
Posts: 2879
Joined: Mon Jul 20, 2009 11:18 pm
Location: New Hampshire

Re: i want to buy consumables from them

Postby jimcolt » Fri Apr 05, 2013 7:41 am

The Chinese copies.....which infringe on Hypertherm's international patents as well as Copyrights.....are not manufactured from the proper materials and do not hold tolerances that are necessary for proper arc constriction in the torch. It is very likely that internal torch damage could occur with using consumables of poor manufacturing methods, materials and tolerances. These consumable copies cost less to purchase, but due to lower cut quality and lower life....actually end up costing more to use.

Using genuine consumables in my Hypertherm Powermax85....it costs less than 1/2 of one U.S. penny to cut 1 foot of 1/2" steel. There is no other cutting process that is that inexpensive......so why try to save a few pennies on purchase price?


Jim Colt Hypertherm



hardsteel wrote:can you confirm me if their consumable are Genuine? in fact i have ordered Chinese consumables before , they look like from outside the same with Genuine , you can make cutting with but you can not reach even the recommended hypertherm parameters (speed cutting ), did you have experiences with Harris Welding in cnc cutting ? .
thanks

hardsteel
Posts: 51
Joined: Fri Jan 13, 2012 11:02 am
Location: libya , zwara

Re: i want to buy consumables from them

Postby hardsteel » Fri Apr 05, 2013 8:21 am

thanks jim for your reply and continued help . i stopped to order Chinese consumable as well as i found away to order from USA by a shipping company in libya that ship only lightweight from USA and England and Canada , it costs less than from nearest distributor to Libya as well as to make sure that they are come from USA (genuine).

kbenz
Posts: 427
Joined: Sun Oct 31, 2010 1:26 pm
Location: Kannapolis,NC
Contact:

Re: i want to buy consumables from them

Postby kbenz » Fri Apr 05, 2013 12:19 pm

just now realized you are in libya. not sure if harris can ship out of country either. they are genuine hypertherm though. and prices on consumables are bout same as the one you inquired about. Highly doubt the shipping would be free though......
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm65 machine torch
Millermatic 210
Spoolmatic 30a w/ WC-115a
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl


Return to “Plasma Consumables”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's