Need a fine tip for aSnap-on plasma 50

Information on plasma cutting nozzles, electrodes, and other consumables.
Post Reply
johnd123
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Mon Oct 06, 2014 8:50 pm

Need a fine tip for aSnap-on plasma 50

Post by johnd123 »

Anybody know if you can buy a fine tip for a snap-on plasma 50.thanks johnd123
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7754
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Need a fine tip for aSnap-on plasma 50

Post by acourtjester »

you may have better luck if you can figure out if they used another manufactures Torch and see if there are more tip available. Many of the cheaper plasma do that.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Maryann
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Mar 31, 2017 5:56 pm

Re: Need a fine tip for aSnap-on plasma 50

Post by Maryann »

Is it a YA-5550 machine (great machine as about maintainable a machine as you can buy)?
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3086
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Need a fine tip for aSnap-on plasma 50

Post by jimcolt »

A picture of the torch would help. Early Snap-on plasma's used an old Hypertherm torch design, if I saw it I would recognize it.

Jim Colt Hypertherm
Post Reply

Return to “Plasma Consumables”