It is currently Fri Sep 22, 2017 2:58 pm

 

Hypertherm T30v Shielded Consumables?

Information on plasma cutting nozzles, electrodes, and other consumables.
Bigdogbro1
Posts: 96
Joined: Tue Aug 18, 2015 9:20 am
Contact:

Hypertherm T30v Shielded Consumables?

Postby Bigdogbro1 » Fri Aug 05, 2016 10:19 am

I thought I read somewhere that Hypertherm was creating a new 30A shielded consumable set for the PM45 type torch.
We could also use Ohmic touch off with the shielded 30A consumables

Any possibility here Jim?

mechanicalmongoose20
Posts: 32
Joined: Mon Sep 19, 2011 12:35 pm
Contact:

Re: Hypertherm T30v Shielded Consumables?

Postby mechanicalmongoose20 » Fri Aug 05, 2016 5:23 pm

Bigdogbro1 wrote:I thought I read somewhere that Hypertherm was creating a new 30A shielded consumable set for the PM45 type torch.
We could also use Ohmic touch off with the shielded 30A consumables

Any possibility here Jim?


Now that would be killer @jimcolt
5x10 PPLLC GANTRY
PMX45
CANDCNC 620-4 OHMIC FEATHER TOUCH
VELOX Z AXIS WITH CUSTOM MOUNTS
SWAG FINGER BRAKE
ALPHATIG 200X
HOBART 210MVP

jimcolt
Elite Contributing Member
Elite Contributing Member
Posts: 2709
Joined: Mon Jul 20, 2009 11:18 pm
Location: New Hampshire
Contact:

Re: Hypertherm T30v Shielded Consumables?

Postby jimcolt » Sun Aug 07, 2016 8:21 am

There are currently no plans for development of shielded 30 amp consumables for the existing Powermax45 style torch. Our Torch and Consumables teams are working on lower amperage cutting for future product releases. I suspect that if newer consumable technology with low amperage shielded consumables becomes available it likely will be in a different torch design......when we have more information we will announce it!

Jim Colt Hypertherm

stonebriar
Posts: 4
Joined: Mon Oct 10, 2016 4:13 pm
Contact:

Re: Hypertherm T30v Shielded Consumables?

Postby stonebriar » Sat Nov 05, 2016 2:30 pm

This is in the PM45 manual.

A complete set of shielded consumables is shipped with the T45m machine torch. In addition, an ohmic sensing
retaining cap is available for use with the T45m shielded consumables. Unshielded consumables and the T30v
(Powermax30) 30 A consumables are also available for use with the T45m.

Would these consumables be of use for thinner gauge 14-16 material than the 45 consumables?

User avatar
larrycameron44
Elite Contributing Member
Elite Contributing Member
Posts: 514
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand
Contact:

Re: Hypertherm T30v Shielded Consumables?

Postby larrycameron44 » Mon Dec 19, 2016 4:33 am

Yes I have used the 30 amp consumables for the POWERMAX 45 for the last 5 years.
Good from .5mm copper to 3mm mild steel
Larry Cameron
RusticMetalArt


Return to “Plasma Consumables”

Who is online

Users browsing this forum: No registered users and 1 guest