It is currently Mon Nov 20, 2017 2:51 am

 

Scrap Material

Learn and share dross removal techniques, experiences, and product knowledge here.
rickjamesbish
Posts: 56
Joined: Sun Oct 30, 2016 8:46 pm

Scrap Material

Postby rickjamesbish » Sun Jul 09, 2017 9:17 am

So I have been saving up my scrap material in hopes of taking to recycle yard and getting enough money to by maybe get an 8x4 sheet or even a 4x4 sheet of 14 gauge. Luckily I called prior to loading this all on a trailer and taking it in. $40 a ton !!!! Not worth even trying to keep the scrap. I think I saw another place offering twice that but still $80 for a ton. This is in California. Is this normal ? What are you guys doing with your scrap ?

Old Ironworker
Posts: 132
Joined: Tue Mar 05, 2013 1:33 pm
Location: South Haven, Mich.

Re: Scrap Material

Postby Old Ironworker » Sun Jul 09, 2017 10:37 am

Yes, I would say that's normal all over and also here in Mich. Some of the yards around here hold large piles ( waiting for more$$ ) , smaller yards turn their piles faster. A lot like putting gas in your truck ! HA. You just have to call around. Good Luck!
Dale......

motoguy
Posts: 915
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Scrap Material

Postby motoguy » Mon Jul 10, 2017 12:01 am

I keep a scrap trailer just because I need a place to store my scrap material. When it's full, I run it up to the salvage yard so I can empty it and continue having a place to pile my scrap material. I stop by Taco Bell on the way home, and spend my proceeds on the dollar menu.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

bbkf2009
Posts: 26
Joined: Sun Dec 15, 2013 9:22 pm

Re: Scrap Material

Postby bbkf2009 » Mon Jul 10, 2017 6:56 pm

Here in central Nebraska it's $140 a ton

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1302
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Scrap Material

Postby little blue choo » Tue Jul 11, 2017 1:30 am

Just sold mine for 6.5 cents a pound. That comes out to $130 per ton.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1353
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Scrap Material

Postby tnbndr » Tue Jul 11, 2017 7:31 am

I have a scrap guy I call when I want mine to disappear. He shows up loads his truck and takes it away.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

plasmartist
Posts: 39
Joined: Mon Aug 07, 2017 1:31 pm

Re: Scrap Material

Postby plasmartist » Wed Aug 16, 2017 5:51 pm

I nest my parts pretty close so my skeletons don't weigh much at all. So when my pile is overwhelming it only weighs 500 lbs. For the $30 they give me I have to make a 24 mile round trip, spend an hour checking in and unloading, so rather than spending an hour and a half to net $25, I call the scrap guys to pick it up for free.

User avatar
Capstone
Elite Contributing Member
Elite Contributing Member
Posts: 1003
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Scrap Material

Postby Capstone » Wed Aug 16, 2017 7:19 pm

I'm close to DC and the rates vary, depending a lot of location and size of operation. The last time I dealt with my steel scrap it was a giant waste of time, energy and a real health risk. I cut up drops small enough to fit in those 40gal black plastic bins with the yellow tops. They can get heavy fast, even if they are barely full. Never again.

I had a scrap guy stop buy thinking he was going to haul stuff from the previous tenant of my current space. I told him to check back in a couple of months for my steel. I'll probably take time to scrap my Aluminum, but the steel skellys are starting to pile up a bit and I just don't want to deal with all the lifting and driving for a few bucks.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
Cheap Royalty-Free Graphic Stock Images
DIY 4x4", VeloxCNC "Z" & C&CNC, MACH3, SheetCAM
HT PM45, WeldPAK 180

yroc fab
Posts: 11
Joined: Mon May 16, 2016 3:56 am

Re: Scrap Material

Postby yroc fab » Wed Aug 23, 2017 2:40 am

I through mine in an old truck bed trailer and when its full i call my buddy and he comes and takes it to the dairy farm for farm repairs. anything small i toss in the trash


Return to “Dross/Slag Removal”

Who is online

Users browsing this forum: No registered users and 1 guest