It is currently Sun Dec 17, 2017 10:39 am

 

Muriatic Acid consentration

Learn and share dross removal techniques, experiences, and product knowledge here.
User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1312
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Muriatic Acid consentration

Postby little blue choo » Tue Sep 22, 2015 9:04 pm

What concentration of muriatic acid do you use to remove dross.

Thanks
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Masons Forge
Posts: 78
Joined: Fri Jul 05, 2013 11:18 pm
Location: Concord NC
Contact:

Re: Muriatic Acid consentration

Postby Masons Forge » Tue Sep 22, 2015 9:43 pm

I use 1:1.5 to 1:2 acid to water. This is just an estimate. I don't measure

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1312
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Muriatic Acid consentration

Postby little blue choo » Tue Sep 22, 2015 11:19 pm

What I was looking at was like 32% or something like that. So you then cut the 32% stuff 1 part acid to 1.5 part water. Is this right?

Thanks
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape


Return to “Dross/Slag Removal”

Who is online

Users browsing this forum: No registered users and 1 guest