Need Clear Coat Advice for Aluminum

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
Hambone404
1 Star Member
1 Star Member
Posts: 24
Joined: Sat Jan 03, 2015 8:58 am

Need Clear Coat Advice for Aluminum

Post by Hambone404 »

Hi,

I have an aluminum (5052) piece that will be used indoors in an office environment. It is larger than my powder coating oven and I want to preserve the brushed look and prevent oxidation. Other than clear powder coating, what is the best spray clear coat to use on raw aluminum? I am not opposed to getting a decent hvlp gun, but since I rarely spray clear, is there a good rattle can clear for aluminum? I have read about some spray on clear coats may chip or peel on aluminum.

Any advice?

Thanks,
Brad
Dana gear
2 Star Member
2 Star Member
Posts: 54
Joined: Fri Jan 13, 2017 10:55 pm

Re: Need Clear Coat Advice for Aluminum

Post by Dana gear »

Napa auto parts sell a rattle can clear that works great on carbon/aluminum, we have used it on different projects in the shop for years.
When applied properly even exposed to the outdoors I have not experienced any chipping or peel.
We used it on cast iron as well. It dries very fast. Some of these projects just need a quick and dirty rattle can .
Post Reply

Return to “Paint & Other Top Coats”