It is currently Thu Apr 19, 2018 1:32 pm

 

Dirt in clearcoat

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1408
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Dirt in clearcoat

Postby little blue choo » Sun May 22, 2016 3:19 pm

I have been having a lot of problems with dust and dirt in my clear coat. I am using a high gloss auto clear coat and really shows any thing that settles on it. Just wondering what everyone else is doing. I really don't want to build a small paint booth but may have to if this keeps up.

Thanks
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

79Bronco
Posts: 26
Joined: Fri Oct 09, 2015 10:59 am

Re: Dirt in clearcoat

Postby 79Bronco » Sun May 22, 2016 8:55 pm

Paint booth / room is really your best option.

User avatar
Gamelord
Elite Contributing Member
Elite Contributing Member
Posts: 1598
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Dirt in clearcoat

Postby Gamelord » Mon May 23, 2016 2:15 pm

One thing that may help is to water everything down around where you are spraying first, that helps keep the dust to a miinimum....but a booth is going to be the only true solution.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD

Pat4rd
Posts: 82
Joined: Thu Apr 06, 2017 6:32 pm

Re: Dirt in clearcoat

Postby Pat4rd » Wed Nov 29, 2017 1:27 pm

Hey rick, I was looking at your post and figured I would ask what you ended up doing to solve this problem. Having a metal fab shop and trying to have a good quality finish on metals is not working out for me. I'm thinking about taking the to a 3rd party to paint. Thank you
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.

abmetal
Elite Contributing Member
Elite Contributing Member
Posts: 604
Joined: Mon Dec 26, 2011 8:37 pm
Location: Southeast Missouri

Re: Dirt in clearcoat

Postby abmetal » Wed Nov 29, 2017 7:49 pm

That's what I do. When I need stuff cleared, I take it to a friend's body shop and they clearcoat it. And in return we cut things for them. A good marriage.

Allen

Pat4rd
Posts: 82
Joined: Thu Apr 06, 2017 6:32 pm

Re: Dirt in clearcoat

Postby Pat4rd » Wed Nov 29, 2017 8:45 pm

abmetal wrote:That's what I do. When I need stuff cleared, I take it to a friend's body shop and they clearcoat it. And in return we cut things for them. A good marriage.

Allen


That's a very good way to do it!
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1408
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Dirt in clearcoat

Postby little blue choo » Wed Nov 29, 2017 10:47 pm

Pat4rd wrote:Hey rick, I was looking at your post and figured I would ask what you ended up doing to solve this problem. Having a metal fab shop and trying to have a good quality finish on metals is not working out for me. I'm thinking about taking the to a 3rd party to paint. Thank you

I changed several things and no longer have a problem.
1. I started using a fast drying clear coat. Tacts off in 5 minutes
2. I started hanging my pieces instead of laying them flat. Have to be careful not to spray too heavy and cause runs but it's harder for dust to settle on it.
3. I blow down the area I'm painting in a few minutes before I paint.
4. I use a tac cloth on piece before painting.
5. I blow the piece off with paint gun just before I spray.
On the rare occasion that I get some dirt that I can't live with in a piece I wait an hour or so, wet sand it and shoot another coat on.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Pat4rd
Posts: 82
Joined: Thu Apr 06, 2017 6:32 pm

Re: Dirt in clearcoat

Postby Pat4rd » Thu Nov 30, 2017 3:10 am

little blue choo wrote:
Pat4rd wrote:Hey rick, I was looking at your post and figured I would ask what you ended up doing to solve this problem. Having a metal fab shop and trying to have a good quality finish on metals is not working out for me. I'm thinking about taking the to a 3rd party to paint. Thank you

I changed several things and no longer have a problem.
1. I started using a fast drying clear coat. Tacts off in 5 minutes
2. I started hanging my pieces instead of laying them flat. Have to be careful not to spray too heavy and cause runs but it's harder for dust to settle on it.
3. I blow down the area I'm painting in a few minutes before I paint.
4. I use a tac cloth on piece before painting.
5. I blow the piece off with paint gun just before I spray.
On the rare occasion that I get some dirt that I can't live with in a piece I wait an hour or so, wet sand it and shoot another coat on.

Rick



Really good info! Thanks for the advise. I'll start doing this prep and hopefully it will take care of the issue.
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.


Return to “Paint & Other Top Coats”

Who is online

Users browsing this forum: No registered users and 1 guest