It is currently Mon Sep 24, 2018 1:52 pm

 

Blasting sand

Learn and share abrasive & texturing finishing techniques, experiences, and product knowledge here.
Patrick Waite
Elite Contributing Member
Elite Contributing Member
Posts: 239
Joined: Sun May 16, 2010 3:28 am

Blasting sand

Postby Patrick Waite » Tue Jan 10, 2012 10:38 pm

What is a good blasting Media to use in a blasting Cabnet. Im putting something together here and wanted to know what every one else used to get good resalts before powder coating.
Patrick

User avatar
FiveORacing
Posts: 207
Joined: Thu Dec 09, 2010 9:46 pm

Re: Blasting sand

Postby FiveORacing » Tue Jan 10, 2012 10:45 pm

For powdercoating I would say Aluminum Oxide. It's a uniform size and doesn't pulverize to dust as quickly. I've tried sand and glass and I found that AO just leaves a better profile and the powder flows out better. Lasts much longer in my Empire cabinet before it's sucked away by the dust collector too. I get 60 and 80 grit. For aluminum I turn the pressure down to about 25psi for the last pass.

I pay .66 a pound for brown aluminum oxide.

oregonsigns
Posts: 11
Joined: Fri Dec 06, 2013 11:42 am

Re: Blasting sand

Postby oregonsigns » Sat Oct 11, 2014 9:54 am

silicon carbide is the best. 100 grit, low to no static , long lasting and cuts quick.


Return to “Abrasive & Texturing”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's