Shot Blasting Equipment
-
- 1 Star Member
- Posts: 10
- Joined: Thu Sep 11, 2014 9:18 pm
Shot Blasting Equipment
I'm considering a shot balster fro preparing my small parts for powder coat. Anyone have or use one they can recommend or not recommend. Any info would be appreciated.
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Shot Blasting Equipment
shot blast or sand blast?
shot blast is heavy duty blasting with steel shot, the only shot blast equipment i've worked with was industrial high feed thru
the nature of the beast makes the machines very self destructive and high maintenance
check out wheelabrator http://www.wheelabratorgroup.com/us/sit ... pment.aspx
shot blast is heavy duty blasting with steel shot, the only shot blast equipment i've worked with was industrial high feed thru
the nature of the beast makes the machines very self destructive and high maintenance
check out wheelabrator http://www.wheelabratorgroup.com/us/sit ... pment.aspx
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
-
- 2.5 Star Member
- Posts: 209
- Joined: Mon Jan 13, 2014 10:37 am
- Location: Boronia, Melbourne, Australia
Re: Shot Blasting Equipment
Try a wet bead blaster? We use them at work for cleaning up everything from stainless to brass and copper. It doesn't damage the surface and things come out looking like new.
Home built 3400 x 1400mm (11 and a bit X a bit over 4.5 feet)
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer
Hypertherm Powermax 45
CandCNC Bladerunner IV
Some air dryer off the internet
Another water seperator I found unused on a shelf
Refrigerated air dryer