Vulcan VC4GD-10

Learn and share powder coating techniques, experiences, and product knowledge here.
Post Reply
crbattery
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Mon Dec 05, 2016 1:07 pm

Vulcan VC4GD-10

Post by crbattery »

A few of these ovens are coming up at local auction from a school surplus inventory.

Would this be a good oven for a beginner PC system?

I have access to NG, LP, Single and 3 phase power.

Thank you all!

Chuck
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Vulcan VC4GD-10

Post by little blue choo »

These are actually food service convection ovens but would work for PC. The one thing I would consider is there size. You be limited to wall art and such. No large items. If all you want to do is small pieces than go for it.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
crbattery
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Mon Dec 05, 2016 1:07 pm

Re: Vulcan VC4GD-10

Post by crbattery »

Wall art is exactly what I want to do. I think they may go fairly cheap. Thank you
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Vulcan VC4GD-10

Post by little blue choo »

You can pick these up at used restaurant supplies for around $400 to $500. Check with them first before you get into a bidding frenzy and over pay.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
crbattery
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Mon Dec 05, 2016 1:07 pm

Re: Vulcan VC4GD-10

Post by crbattery »

My max price is under 200. they are over an hour away. We have a used restaurant equipment place 20 miles from me and a friend works there. Ill be talking to him later on. I will leave the PC to others for now but would like to get into eventually just in the garage probably. Thanks for the advice
Post Reply

Return to “Powder Coat”