Any advice on this piece

Thermal Dynamics plasma cutter discussion forum.
Post Reply
Greg7806
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Aug 30, 2015 6:27 pm
Location: Ontario, Canada

Any advice on this piece

Post by Greg7806 »

I drew this up and cannot figure out why when it comes around to left side at 3 it cuts off its path.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Gogitter
2 Star Member
2 Star Member
Posts: 51
Joined: Tue Oct 06, 2009 7:52 pm
Location: Northern NY

Re: Any advice on this piece

Post by Gogitter »

Tried to open your file in CorelDrawX5...it opens to a file but there appears to be nothing there...
CandCNC Electronic
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
plasmapros
2.5 Star Member
2.5 Star Member
Posts: 135
Joined: Tue Sep 02, 2008 4:33 pm

Re: Any advice on this piece

Post by plasmapros »

Opens for me in X7 and if you zoom in on the areas I have marked in red there are lines extending beyond where they should be. This could be your problem.
Capture.PNG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “Thermal Dynamics / Esab Plasma Cutters”