The wires connected to the power button on my Tracker control panel came off and I don't know where they go. Tech support is closed for the weekend, can anybody help.
Thanks
It is currently Wed Apr 25, 2018 4:42 am
NEED HELP ASAP
-
- Posts: 491
- Joined: Fri Jun 05, 2009 7:09 am
- Location: New Jersey
- Contact:
-
- Posts: 437
- Joined: Wed Sep 29, 2010 12:19 am
Re: NEED HELP ASAP
Do you have a digital manual or a place on there site you can go for downloads? I looked at the site but did not see any document or help library/page. Possibly as an owner you might?
IF it is just the power button and is two wires, then they can go to either side, it is just a NO switch tht passes power through it. You can check it with a meter to see if it is in fact a normally open switch. In the off position, no continuity should show, when on it should show a closed circuit.
If none of that applies, leave us some more details of what you see and what possibly happened to cause the problem.
WSS
IF it is just the power button and is two wires, then they can go to either side, it is just a NO switch tht passes power through it. You can check it with a meter to see if it is in fact a normally open switch. In the off position, no continuity should show, when on it should show a closed circuit.
If none of that applies, leave us some more details of what you see and what possibly happened to cause the problem.
WSS
-
- Posts: 491
- Joined: Fri Jun 05, 2009 7:09 am
- Location: New Jersey
- Contact:
Re: NEED HELP ASAP
All fixed,
Thanks for the help.
Thanks for the help.
-
- Posts: 437
- Joined: Wed Sep 29, 2010 12:19 am
Re: NEED HELP ASAP
Cool! I know the feeling when stuff happens and it's the weekend.
WSS
WSS
- Team Tracker
- Posts: 103
- Joined: Thu Nov 18, 2010 7:36 pm
- Contact:
Re: NEED HELP ASAP
DARRYL21270 wrote:The wires connected to the power button on my Tracker control panel came off and I don't know where they go. Tech support is closed for the weekend, can anybody help.
Thanks
For future reference we offer technical support 24/7....just call the number on the front of your system.
Reid T

1-800-590-7804
Who is online
Users browsing this forum: No registered users and 1 guest