It is currently Tue Aug 21, 2018 10:27 pm

 

Need help to identify a wire plug not connected near torch

Torchmate Hardware discussion forum
inspectweld
Posts: 6
Joined: Tue Dec 26, 2017 10:11 pm

Need help to identify a wire plug not connected near torch

Postby inspectweld » Tue Dec 26, 2017 10:42 pm

I have the Torchmate 3 torch height controller box and set up and the torch height doesn`t work properly.
I bought this machine used and cannot get in touch with the previous owner to ask about the problem I'm having.
I looked at the owners manual and the wiring is in place on the power supply. (Hypertherm Powermax 1650).
I noticed a wire plug near the torch that is not connected to anything, just dangling there and I figure this might be the problem.
I wanted to know if any of you might be able t help me here, thank you

download/file.php?mode=view&id=52883

download/file.php?mode=view&id=52882

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


inspectweld
Posts: 6
Joined: Tue Dec 26, 2017 10:11 pm

Re: Need help to identify a wire plug not connected near torch

Postby inspectweld » Mon Jan 08, 2018 11:06 pm

I did find out what the unplugged wire is in case anyone wants to know. It is plugged in to a calibration device during manufacturing for calibrating the torch head and is not used to actually operate the machine.


Return to “Torchmate”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's