Torchmate Lifter station bearings

Torchmate Hardware discussion forum
Post Reply
SomeGuyFromOlympia
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Aug 17, 2010 9:48 pm

Torchmate Lifter station bearings

Post by SomeGuyFromOlympia »

Does anyone have a source for those little bearings?

TM has a lifter station rebuild kit TMS-101-1000-06
Of course you can not buy it on line.

I have a email into TM, with little hopes or a return answer

I have been working strange hours, and getting to a phone without a bunch of background nose has been quite a challenge lately.
Redneck
3 Star Member
3 Star Member
Posts: 273
Joined: Sat Oct 06, 2012 7:16 pm

Re: Torchmate Lifter station bearings

Post by Redneck »

Try MSC or McMaster Carr
islander261
2.5 Star Member
2.5 Star Member
Posts: 162
Joined: Sun Jan 12, 2014 2:30 pm

Re: Torchmate Lifter station bearings

Post by islander261 »

The bearings are pretty cheap (under $10.00 ea) at McMaster Carr. I posted the part number in another TM lifter thread a short while ago.

John
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: Torchmate Lifter station bearings

Post by gamble »

SomeGuyFromOlympia wrote:Does anyone have a source for those little bearings?

TM has a lifter station rebuild kit TMS-101-1000-06
Of course you can not buy it on line.

I have a email into TM, with little hopes or a return answer

I have been working strange hours, and getting to a phone without a bunch of background nose has been quite a challenge lately.
My last email to them took 11 days for a response
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
SomeGuyFromOlympia
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Tue Aug 17, 2010 9:48 pm

Re: Torchmate Lifter station bearings

Post by SomeGuyFromOlympia »

Well, I did get a email back a lot quicker than expected.

Just a FYI
TMS-101-1000-06 are as follows...

843.75 for the kit
15.00 shipping
858.75 total

(I like how they get you for the shipping like a 5.00 bearing from mcMaster Carr isn't being gouged enough)
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: Torchmate Lifter station bearings

Post by gamble »

What's in the kit?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Post Reply

Return to “Torchmate Forum”